Latest Responses
- Circle/Ramp can't select ramp plunging
- Add TiB2 coating?
- Ball endmill/surfacing example
- Drilling - Cutting Force is Broken
- The RPM seems to max out at 10,000
- Tormach PCNC 440 / lower horsepower machine best practices for building CAM using Fusion360 and HSMAdvisor
- Am I using HSMA incorrectly?
- HSMA speeds and feeds with plastic and O-flutes
- High Feed end mill configuration
- molybdenum
Project Support: Please Register to participate. Select a category and post your question!
Search for materials returned 28 results.
Pages:(2)
[1]
2
| 370 views |
4 answers |
Tormach PCNC 440 / lower horsepower machine best practices for building CAM using Fusion360 and HSMAdvisorBy afarrag on March 6, 2024, 9:14 pmLast Reply: Eldar Gerfanov (Admin) on March 14, 2024, 12:23 am |
|
| 62 views |
Expanded PVC Workpiece RecommendationsBy SteveMills on April 26, 2023, 9:04 am |
||
| 108 views |
3 answers |
Favorite Materials ListBy tkrohn on March 10, 2023, 2:15 pmLast Reply: Eldar Gerfanov (Admin) on March 11, 2023, 11:07 am |
|
| 625 views |
2 answers |
Choosing a Material only listed in the "cross reference"By Aaron on April 3, 2022, 2:21 pmLast Reply: Aaron on April 4, 2022, 7:47 am |
|
| 328 views |
19 answers |
Custom speeds and feedsBy serge.nelissen on November 24, 2021, 6:34 pmLast Reply: serge.nelissen on November 30, 2021, 5:44 pm |
|
| 504 views |
5 answers |
Work Flow using HSM AdvisorBy capt.frito on December 20, 2020, 11:00 amLast Reply: ndlsjk on April 8, 2021, 4:56 pm |
|
| 138 views |
1 answer |
Max feed under machine setup , whats it looking for ?By gurusonwheels on April 5, 2021, 3:29 pmLast Reply: Eldar Gerfanov (Admin) on April 5, 2021, 6:36 pm |
|
| 596 views |
8 answers |
HSMAdvisor 2.xx FeedbackBy ssnseawolf on August 18, 2020, 1:13 pmLast Reply: Gmack on September 6, 2020, 1:09 pm |
|
| 208 views |
3 answers |
Add materialBy Manuel_Stch on January 17, 2020, 10:39 amLast Reply: Eldar Gerfanov (Admin) on January 20, 2020, 7:04 pm |
|
| 245 views |
1 answer |
manufacturers custom feeds and feedsBy Mark_HSM-A on December 29, 2019, 4:31 amLast Reply: Eldar Gerfanov (Admin) on January 6, 2020, 10:34 pm |
|
| 247 views |
11 answers |
Generic materialsBy serge.nelissen on December 1, 2018, 2:36 pmLast Reply: serge.nelissen on December 2, 2018, 11:40 am |
|
| 1311 views |
4 answers |
Crucible (CPM 10V) vs Uddeholm (Vanadis 10 SuperClean)By jday57 on April 4, 2018, 3:53 pmLast Reply: jday57 on April 18, 2018, 12:32 pm |
|
| 313 views |
1 answer |
PrintoutBy PointFive55 on February 28, 2018, 2:39 pmLast Reply: Eldar Gerfanov (Admin) on February 28, 2018, 5:01 pm |
|
| 561 views |
3 answers |
How to handle runout?By MarcusWolschon on November 3, 2017, 3:10 amLast Reply: MarcusWolschon on November 6, 2017, 5:53 pm |
|
| 1287 views |
3 answers |
Need to be able to adjust the SFPMBy glennd on February 14, 2017, 7:30 pmLast Reply: glennd on February 16, 2017, 6:43 am |
|
| 2282 views |
5 answers |
Material option for AcrylicBy Piccyman2 on December 18, 2015, 6:40 pmLast Reply: GeorgeIoak on November 15, 2016, 7:59 am |
|
| 4149 views |
48 answers |
Having Trouble Figuring It OutBy MetalShavings on June 8, 2016, 7:52 pmLast Reply: Eldar Gerfanov (Admin) on August 19, 2016, 4:51 pm |
|
| 1106 views |
2 answers |
Ductile Iron categoryBy Atomkinder on June 15, 2016, 10:01 amLast Reply: Eldar Gerfanov (Admin) on June 15, 2016, 4:35 pm |
|
| 1269 views |
2 answers |
Carbon fiber cut feed and speedBy wec-design on November 29, 2015, 1:19 pmLast Reply: wec-design on November 30, 2015, 1:19 am |
|
| 1413 views |
1 answer |
Coolant F&S modifiers?By Mahkie on August 29, 2015, 12:03 pmLast Reply: Eldar Gerfanov (Admin) on August 29, 2015, 1:48 pm |
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here