avatar

By PointFive55

February 28, 2018, 2:39 pm

Printout

Is there a printer setting which would allow printing the complete Speeds & Feeds panel to include the Cutting Data (right side of screen). As the default works, it only prints to the right end of "+Add Tool", but the type size IS large. My quick workaround: 1) Press the PrtScn button 2) Open Paint App and press Paste 3) Press PrintPreview or Print Downside: The type size is smaller. Why print? I keep a journal (tools,settings,materials). I keep this in a 8-1/2"x11" 3-ring binder. With this HSMAdvisor print, I only need to put the project name, date (time is printed), and any observations, elapsed time, etc.

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

February 28, 2018, 5:01 pm

Hi, After you click on Print icon on the bottom of the window, a system Print dialog shows up. There should be 'Print Properties' button that would let you select Landscape mode. Then all of the information would probably fit onto one page. Of not. Then you would have to adjust the window size a bit to make it fit. Best regards.

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here