Resources and Software For High-Performance CNC Machinists
Email or Username:
Password:
Register Forgot Your Password?
Forums >>FSWizard:Mobile and Online Discussion >>New user help with entering values
avatar

By bb01

May 17, 2023, 11:09 am

New user help with entering values

Hi, I'm new to FSWizard and machining so please be patient if this is a stupid question. I'm using an ISCAR F45ST-D3.0-1.00 facemill with SEKT43-AF-R inserts. Hopefully I've uploaded both the cutter and insert geometry. Since the insert has a 0.252" flat (BS), is it a 90 deg lead angle or 45? Also, the cutter seems to have a rake angle relative to the spindle (vertical). Do I need to account for this? What should I enter for corner radius, flute length, helix angle and lead angle? Thanks!!

SEKT43.jpg SEKT43.jpg fs45.jpg fs45.jpg
Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

May 24, 2023, 1:03 am

Hi, Sorry, i didn't have time to reply earlier,

Quote:
Since the insert has a 0.252" flat (BS), is it a 90 deg lead angle or 45?
It is a 45deg Lead Angle
Quote:
Also, the cutter seems to have a rake angle relative to the spindle (vertical). Do I need to account for this?
The Helix Angle field should handle that angle. But if you don't know the exact value, it is OK to leave that one default.
Quote:
What should I enter for corner radius, flute length, helix angle and lead angle?
In your case, the Corner Angle will be 0, Flute Length = APMX, Helixa Angle - the rake angle (if you can measure it) Lead Angle = 45deg Please let me know if this answers your questions. Also please check this help article for HSMAdvisor. It is for the desktop app, but the naming convention is exactly the same: https://hsmadvisor.com/help?article_id=4432_entering-cutting-tool-geometry

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here