Resources and Software For High-Performance CNC Machinists
Email or Username:
Password:
Register Forgot Your Password?
Forums >>HSMAdvisor Support Forum >>DOC limited to twice the tool Die??
avatar

By ktm3301

August 16, 2018, 8:03 pm

DOC limited to twice the tool Die??

I was checking out a few application we are currently running. I have a .250EM mill a .687 should with about .003 material let to skim. when I try to increase the DOC is defaults back to double the tool dia. is that a design issue or am i missing something that's is causing this limit.

2018-08-15_2-34-23.jpg 2018-08-15_2-34-23.jpg
Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

August 16, 2018, 8:07 pm

Hi, That has to be one of the most common "issues" with my software. But I do not know what to do with it... Just expand the Tool Data panel(square arrow in the top left) and set the flute length to a larger value:) That is because cut parameters are always limited by tool geometry and not the other way round. Best regards!

avatar

ktm3301

August 20, 2018, 5:06 pm

maybe add a warming message when any user input values are changed due be the system to some other limiting factor so the use knows what maybe added to change. like for this feed. "Warning max flute length exceed, review tool flute length"

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here