Resources and Software For High-Performance CNC Machinists
Email or Username:
Password:
Register Forgot Your Password?
Forums >>HSMAdvisor Support Forum >>Need to Create or change P20 material
avatar

By glennd

February 14, 2017, 6:57 pm

Need to Create or change P20 material

Dear Eldar, I work with P20 Material. But in your Database, you have it set to 330 Brinell. I need to copy this P20 Material and change the Brinell to 272 for 28 Rockwell C. The reason for this is because I am working with P20 Material that is 28 Rc. Thus the SFPM will be faster for a softer Material. Id like to be able to change The Hardness by entering in my own hardness and then have the SFPM adjust automatically to the new hardness. But I don't see a way of doing this in your Software. If I could Copy the P20 material and then change the Brinell in the Copy that should make the SFPM adjust to a faster SFPM and RPM. Thanks Glenn

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

February 15, 2017, 1:16 am

Hi, I gave a long answer in the previous post, But here I see clearly what exactly you need. I will try to add it in the next update or so.

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here