avatar

By GarrenHahn

June 24, 2015, 10:24 am

Material Request - Phenolic

Hi, I was wondering if Phenolic and Glass Filled Phenolics could be added to the Material library. Right now, I simply use polycarbonate for regular fabric phenolics and it seems to work ok. As for glass filled phenolic, I haven't found a decent substitute that gives me a comparable feed/speed calculation. Thanks, --Garren

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

June 25, 2015, 9:41 pm

Hello, I will try to do it in the next update. I think HYTAC FLX material will be close to phenolic. Please let me know if it is close. Thanks!

avatar

GarrenHahn

July 14, 2015, 12:06 pm

It seems that the Feed is too slow for the HYTAC FLX. I attached a picture with a typical Facemill we use for standard (non-glass filled) phenolics. If our chipload is too low, the material will burn. Let me know if you need any other data from me. Thanks, --Garren

Facemill.JPG Facemill.JPG

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here