Eldar, Just noticed the RPM is also reverting to the default 10k between tool selections as well. Ken
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
Eldar Gerfanov (Admin)
Updated by: Eldar Gerfanov (Admin)March 23, 2013, 11:43 am
Hello, Tools are loaded as they saved. In other words when loading tool from the tool library it will bring back the machine settings it was originally saved with. That includes Machine, MaxRPM and basically everything inside "machine limits" group. You can control what gets overwritten when a tool/cut is loaded though. If you go to Settings tap, you will see Sticky fields settings group. Check which fields you want to remain constant between tools. Say of you want to just load saved tools and want machine settings to remain the same, check Machine, maxrpm, maxfeed,maxtorque check boxes What and how gets saved is a big issue for many people, so i wanted to give users every possible option to control that.
Blue_Chips
Ah OK, that makes sense. Thanks
Blue_Chips
The RPM not sticking has creeped back in Eldar :biggrin:
Eldar Gerfanov (Admin)
This issue has been too fixed in the latest v0.024. Thanks for telling me.