avatar

By setya

September 25, 2021, 7:04 pm

Max torque and deflection

Hi,

I still don't understand how do you calculate max torque and deflection? There is no information about the diameter of the shank, so it is impossible to calculate the strength of the shank and its deflection. I input tool data directly, do not use databases

Another question, why the speed bar slide is red even though it is still far from the speed limit of HSS on hardwood (2000m/min vs >120000m/min as recommended tools Vendor).

hsm.jpg hsm.jpg

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

September 25, 2021, 11:31 pm

Hi,

To answer your first question. Shank is mostly assumed to be the same diameter as the tip.

But you can enter enter value by expanding the tool data area with the Up/Down button on the top left.

Speed and feed override sliders turn red when you go over 150%

If you have manufacturers suggested speeds and feeds then you should totally use those.

I can't speak as to why the recommended values are different without seeing what the manufacturer suggests and in what context.

Best regards.

avatar

Eldar Gerfanov (Admin)

September 25, 2021, 11:35 pm

Also please make sure you enter correct tool parameters. I can't imagine a chamfer tool with 90mm tip diameter.

Not saying you can't have it. But it sounds wrong.

Use the Tool tab on the right to see the current tool representation as HSMAdvisor sees it.

avatar

setya

September 26, 2021, 2:29 am

These are tools I want to use, not exactly but something like this which are shank and cutting tip are in different diameter.

2669437_06b75ba7-db24-47dc-9268-22fb4f4854ad (2).jpg 2669437_06b75ba7-db24-47dc-9268-22fb4f4854ad (2).jpg img-t-slot-end-mill_dovetail-milling-cutter.jpg img-t-slot-end-mill_dovetail-milling-cutter.jpg
avatar

Eldar Gerfanov (Admin)

September 26, 2021, 3:16 pm

Hi, for specialized cutters like that you better go with manufacturer recommendations.

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here