By paulvella
August 10, 2022, 3:17 am
mm/sec units
Can an option be added to use mm/sec units instead of m/min ?
Latest Responses
- Drilling - Cutting Force is Broken
- The RPM seems to max out at 10,000
- Tormach PCNC 440 / lower horsepower machine best practices for building CAM using Fusion360 and HSMAdvisor
- Am I using HSMA incorrectly?
- HSMA speeds and feeds with plastic and O-flutes
- High Feed end mill configuration
- molybdenum
- Which coating select for a TiSiN endmill?
- Attaching custom S&F's to specific cut parameters possible?
- Typo in G76 example G-code
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
Eldar Gerfanov (Admin)
Hi,
m/min and mm/min units are standard in displaying the Cutting Speed and the Feed Rate when CNC machining.
Are you talking about cutting speed or the feed rate?
Regardless. Unfortunately, the cost of maintaining this feature is prohibitive and does not add value for most users.