By ddexdd
October 15, 2023, 7:29 pm
Typo in G76 example G-code
Just reporting a typo in the example for G76 Peck Drilling Cycle example.
G76 Typo.PNG
Latest Responses
- Drilling - Cutting Force is Broken
- The RPM seems to max out at 10,000
- Tormach PCNC 440 / lower horsepower machine best practices for building CAM using Fusion360 and HSMAdvisor
- Am I using HSMA incorrectly?
- HSMA speeds and feeds with plastic and O-flutes
- High Feed end mill configuration
- molybdenum
- Which coating select for a TiSiN endmill?
- Attaching custom S&F's to specific cut parameters possible?
- Typo in G76 example G-code
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
Eldar Gerfanov (Admin)
Will be fixed in the next update.
Thanks!
ddexdd
Found the same typo in the android app as well.