By rrenn
December 1, 2023, 10:05 am
molybdenum
Hi Any suggestions for material similar to Molybdenum from drop down material menu in FS pro ver. to find out roughly speeds an and feeds Very happy so far with the app best
Latest Responses
- Ball endmill/surfacing example
- Drilling - Cutting Force is Broken
- The RPM seems to max out at 10,000
- Tormach PCNC 440 / lower horsepower machine best practices for building CAM using Fusion360 and HSMAdvisor
- Am I using HSMA incorrectly?
- HSMA speeds and feeds with plastic and O-flutes
- High Feed end mill configuration
- molybdenum
- Which coating select for a TiSiN endmill?
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
MikeHorton
Maybe start with a cast iron?
Eldar Gerfanov (Admin)
Hello, Sorry I missed the message. Yes, looks like Cast Iron 250-260 should be a good starting point. I haven't machined pure Mo. Please tell us how this goes.
rrenn
thank you.