Resources and Software For High-Performance CNC Machinists
Email or Username:
Password:
Register Forgot Your Password?
Forums >>General Discussion >>Tapping data
avatar

By wec-design

November 7, 2016, 12:15 pm

Tapping data

Hi Eldar, I am advancing in my CNC knowledge thanks your software. One question what it would feedrate be for rigth tapping for a ISO M1,6MM? I am working with 7075 aluminium and I am not sure what data I must use In fusion the software asks me RPM and surface not more, but in your software ISO tapping offers feed/rev ratio only. How should I interpretate these data? Best regards Gilberto

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

November 8, 2016, 1:39 pm

Hi, Your CAM knows what kind of tap you are using thus it knows what kind of advancement per rotation to program for tapping. All it needs from you is the RPM / Cutting speed. HSMAdvisor does the same. It calcultaes the RPM based on material and tap dia and in/rev value is taken directly from the tap's pitch. Btw. Make sure you limit the Max tap RPM in the machine profile to a value that your machine can handle. Usually 800 rpm works nicely on most machines. Regards :ernaehrung004:

avatar

wec-design

November 10, 2016, 12:36 pm

Hi Eldar I am going to apply 800 rpm by make sure. Thanks a lot :wink: Regards

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here