Latest Responses
Username:
Password:
avatar

By doZrQ

November 3, 2021, 7:25 am

Trochoidal / peel

I see on the download page it mentions torchoidal / peel milling, but I fail to see in the software how it is done? Any information would be appreciated. Thanks!

Answers:

Pages:(1) [1]
avatar

Eldar Gerfanov

November 3, 2021, 7:43 am

Hello,

Please check out this article and let me know if it clears things up for you:

https://hsmadvisor.com/?page=help&article_id=4574_chip-thinning-and-hsm-high-speed-machining

Best regards!

avatar

doZrQ

November 3, 2021, 8:28 am

Thank you for that! But I think I am still missing something. I do think I understand the principles noted in the article and how they relate to trochoidal milling, even though it is not mentioned. But at the same time I think my machine parameters may limit any effect of ticking those boxes. For example, with trochoidal milling, I would expect DOC to increase, twice or more of the tool diameter, but that parameter does not change at all.

avatar

Eldar Gerfanov

November 3, 2021, 9:16 am

Hi,

All those Chip Thinning and HSM check boxes do it tell HSMAdvisor to consider WOC when calculating chip load and cutting speed.

DOC and WOC do not change on their own.

You need to specify the DOC according to your preferred depth of the feature or a pass. Then you need to specify 7-10% WOC.

Also Speeds and Feeds will change only if there is any chip thinning possible (at WOC < 30%). If you are slotting, Chip Thinning/HSM boxes will have no effect.

Also Also. Yes your parameters may further be adjusted by your machine settings. If you don't have enough power, HSMAdvisor will suggest DOC according to that.

Best regards.

Answers:

cant leave messages here

© 2009-2018 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here