Resources and Software For High-Performance CNC Machinists
Email or Username:
Password:
Register Forgot Your Password?
Forums >>General Discussion >>Feed to 904 L [SOLVED]
avatar

By wec-design

July 27, 2017, 12:44 pm
Updated by: August 22, 2017, 9:00 am

Feed to 904 L [SOLVED]

Hi Eldar, I would like to start to machining steel 904L. Is there a feed similar to this SS? Machinists say that it is similar to 316L but I have to decreased feeds a kittle. It is ok? Best regards Gilberto

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

July 27, 2017, 5:19 pm

Hi, it seems to be quite similar to 316. I would suggest machining it in the similar way. Maybe 15% slower speed. Cheers.

avatar

wec-design

July 28, 2017, 1:47 am
Updated by: Eldar Gerfanov (Admin)July 28, 2017, 5:47 am

Quote:"ADMIN"
Hi, it seems to be quite similar to 316. I would suggest machining it in the similar way. Maybe 15% slower speed. Cheers.
Hi Eldar Thanks for your suggestion. I will do it Best regards Gilberto

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here