Resources and Software For High-Performance CNC Machinists
Email or Username:
Password:
Register Forgot Your Password?
Forums >>General Discussion >>How is calculated a micro circular saw blade?
avatar

By wec-design

June 8, 2016, 8:52 am

How is calculated a micro circular saw blade?

Hi Eldar, I would like to know how I can calculate disk o saw blade feedcut. Diameter 8mm with 48 Z and 0.6mm thickness Thanks in advance Best regards Gilberto

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

June 9, 2016, 12:25 am

Hi, You could try to set up the exact cutter specs. Simply set your diameter, number of teeth and neck size. It does work with bigger cutters very well. But for something so tiny I would try to double check with the manufacturers data. Regards.

avatar

wec-design

June 23, 2016, 2:44 pm

Thanks Eldar, I have read cutter spec and I solved the problem. Another questions what do you think it would be the best cut feed to PMMA? Thanks again, I am learning a lot with this sotware Regards Gilberto

avatar

Eldar Gerfanov (Admin)

June 23, 2016, 10:50 pm

Quote:"WEC-DESIGN"
Thanks Eldar, I have read cutter spec and I solved the problem. Another questions what do you think it would be the best cut feed to PMMA? Thanks again, I am learning a lot with this sotware Regards Gilberto
It is Acrylic. You can use the polycabonate material listing. :ernaehrung004:

avatar

wec-design

June 24, 2016, 1:08 am

Thanks Eldar :biggrin:

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here