Latest Responses
Login:
Password:
avatar

By TheWolfOfWalmart

July 23, 2019, 11:20 am

S&F Maxed Out Regardless of Op

I've had this happen on multiple occasions but most of the time it's unclear to me if something is amiss. This time however I am sure something is wrong.

Occasionally, the S&F I get stays maxed out regardless of tool or cutting conditions. In this particular instance, the maxed out S&F I am getting exceeds both my spindle RPM limits, as well as my max RPM for taps.

I've attached a picture showing the S&F page as well as my machine settings. Does anyone know what's up with this?

2019-07-23_10-08-32.jpg 2019-07-23_10-08-32.jpg

Answers:

Pages:(1) [1]
avatar

Eldar Gerfanov

July 23, 2019, 6:35 pm

Hello,

Thank you for reporting the issue....
Yep. Thats a bug.
I will fix it in the next update.

Best regards.

avatar

Eldar Gerfanov

August 6, 2019, 9:32 pm

Hi,

The reported issue has been fixed.

Please download a latest update here:
https://hsmadvisor.com/?page=Download

Thank you!
Best regards.

avatar

TheWolfOfWalmart

September 16, 2019, 6:24 pm

Sorry to necro this. I haven't had the chance to try out the most recent version until today. I am on v1.706 now and I am still having the issue.

avatar

TheWolfOfWalmart

September 17, 2019, 12:40 pm

Here is a current snapshot of what is going on.

2019-09-17_10-37-34.png 2019-09-17_10-37-34.png
avatar

Eldar Gerfanov

September 17, 2019, 1:02 pm

Quote:"THEWOLFOFWALMART"
Here is a current snapshot of what is going on.


Hi,

What you are showing there is the normal behaviour.

The tool is small, so when SFM converts to RPM, you get machine rpm maxed out.

In case you are wondering if that SFM is OK, I can assure you (with adequate coolant) it will work just fine.

Best regards.

avatar

TheWolfOfWalmart

September 19, 2019, 8:54 pm

My mistake- That makes sense. I did have this issue on an offset boring head op as well. Is that to be expected? I'm under the impression that offset boring heads aren't to be run at that RPM.

avatar

Eldar Gerfanov

September 22, 2019, 12:00 pm

Quote:"THEWOLFOFWALMART"
My mistake- That makes sense. I did have this issue on an offset boring head op as well. Is that to be expected? I'm under the impression that offset boring heads aren't to be run at that RPM.

Hi,

Can you provide a screeshot of that?

Regards.

avatar

TheWolfOfWalmart

September 23, 2019, 10:04 am

Of course

2019-09-23_9-02-41.png 2019-09-23_9-02-41.png
avatar

Eldar Gerfanov

September 24, 2019, 9:10 pm

Quote:"THEWOLFOFWALMART"
Of course


Same issue as above. The fact that most boring heads do not operate at that kind of RPM does not mean all don't. I used boring heads with 5k limit.

For boring heads it is useful to apply for example 1200 RPM to Max RPM in the Manufacturer Overrides panel.

Generally for softer materials it us worth going as fast as possible with the chip-load that is acceptable for food finish.

Regards.

avatar

TheWolfOfWalmart

September 25, 2019, 12:35 am

I was unaware of that feature. Thank you!

Answers:

cant leave messages here

© 2009-2018 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here