By User10967
Apparent Feedrate Calculations
Hello. The new arc calculator is fantastic.
I'd like to see a feature for calculating apparent Feedrate of an end mill in an arc/bore.
I sometimes have to bring bores to size using macros and have to manually calculate the apparent Feedrate because my current available tool options are not ideal. For example: a 10mm endmill enlarging a 12mm bore.
A variable calculator with tool diameter, finished bore diameter, apparent feedrate, and desired feedrate(for correct chip load) that works like the arc calculator would be a very useful addition.
Also, it'd be awesome if there was a comparison chart of equivalent materials in the different international standards. I have one saved as a file on my phone and I'd love to just go into the application to see it. And if your programmers are feeling frisky, make the material chart show the equivalent in the various standards while selecting materials in the f/s calculator. I attached an example of a material chart.
Thanks for all the hard work that went into this application.
ForumAutomation
Both suggestions have been reviewed and logged in the issue tracker, and will be prioritized.
Apparent feedrate calculator for end mills in arcs/bores — logged as https://github.com/swindex/FSWizard-App/issues/43. This is a pretty straightforward addition to the existing arc calculator and will be added soon.
International material equivalents comparison chart — logged as https://github.com/swindex/FSWizard-App/issues/44.
Thank you for the feedback and for the positive note on the new arc calculator.
Eldar Gerfanov (Admin)
Hello,
Thank you for your suggestion.
The Arc Feed Compensation calculator has been added to the apps with Over the Air update v2.6.3
This means you do not have to update the app - it will be loaded automatically.
Best regards.