Resources and Software For High-Performance CNC Machinists
Email or Username:
Password:
Register Forgot Your Password?
Forums >>HSMAdvisor Support Forum >>Spindle Torque Curves
avatar

By ForeverGreen

December 4, 2025, 1:32 pm

Spindle Torque Curves

I've been using HSMAdvisor for quite awhile, but I've never taken time to really set anything up.  I'm trying to build a few machines at a time.  I have a Mori DuraVertical 5060, and a 5080.  These are older machines, and I'm honestly not sure what they've done with the manuals.  These machines were here long before me.  Does anyone know where I could go to get the information needed to build the Power Curve?  Is it worth it, or should I just do the max RPM and ignore the power curve?

Answers:
cant leave messages here
Pages:(1) [1]
avatar

therookie

December 4, 2025, 2:05 pm

You can email DMG directly and/or your local DMG reseller and ask.

In the email I would also include the Serial # and max RPM of the spindle so it's easier for them to find.

I've done this for other companies and they were pretty helpful or got me in the ball park.

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here