By asic_david
May 5, 2022, 7:25 am
Add Tool
When adding a new tool into the library, where do I define the corner radius?
Latest Responses
- Circle/Ramp can't select ramp plunging
- Add TiB2 coating?
- Ball endmill/surfacing example
- Drilling - Cutting Force is Broken
- The RPM seems to max out at 10,000
- Tormach PCNC 440 / lower horsepower machine best practices for building CAM using Fusion360 and HSMAdvisor
- Am I using HSMA incorrectly?
- HSMA speeds and feeds with plastic and O-flutes
- High Feed end mill configuration
- molybdenum
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
Eldar Gerfanov (Admin)
Updated by: Eldar Gerfanov (Admin)November 23, 2024, 7:28 pm
Hello, Expand the Tool Data panel by clicking on the arrow in its top-left corner and find the radius there. Here is a detailed explanation with screenshots: https://hsmadvisor.com/help?article_id=4432_entering-cutting-tool-geometry Best regards.
asic_david
Thank you!