By Blue_Chips
March 31, 2015, 7:01 pm
Material Removal rate (MRR) question
Eldar, 4.38in ^ 3 What on earth does this ^3 mean to users? If it's not a add/subtract/multiply/divide equation I'm lost. :) Ken
Latest Responses
- Circle/Ramp can't select ramp plunging
- Add TiB2 coating?
- Ball endmill/surfacing example
- Drilling - Cutting Force is Broken
- The RPM seems to max out at 10,000
- Tormach PCNC 440 / lower horsepower machine best practices for building CAM using Fusion360 and HSMAdvisor
- Am I using HSMA incorrectly?
- HSMA speeds and feeds with plastic and O-flutes
- High Feed end mill configuration
- molybdenum
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
Eldar Gerfanov (Admin)
Updated by: Eldar Gerfanov (Admin)March 31, 2015, 8:12 pm
Lol This means cubic inches :) By the way. I fixed the problem you previously reported about drop-down columns runing on top of each-other. Cheers!
Blue_Chips
Well why doesn't is say so :D 4.38ci Thanks on the other.
mhajicek
"^3" is computerese for "to the power of 3".