By Jeremy
August 16, 2014, 4:14 am
Wizard is running slow
It may just be my computer or it may be the site. But I can barely get wizard to run. Is everything alright?
Latest Responses
- Circle/Ramp can't select ramp plunging
- Add TiB2 coating?
- Ball endmill/surfacing example
- Drilling - Cutting Force is Broken
- The RPM seems to max out at 10,000
- Tormach PCNC 440 / lower horsepower machine best practices for building CAM using Fusion360 and HSMAdvisor
- Am I using HSMA incorrectly?
- HSMA speeds and feeds with plastic and O-flutes
- High Feed end mill configuration
- molybdenum
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
Eldar Gerfanov (Admin)
The online calculator is experiencing a very significant slowdown right now. I complained to my web hosting and they try to convince me it is my problem. I am working on the problem. Meantime, if you still have not tried my HSMAdvisor calc - do so. Thank you for patience.
Jeremy
Well wizard is working a lot faster today. But it won't let me change anthing. If i'm using a .500 tool, tool length is .500, flute length is .500, as well as depth of cut. Thanks.
Eldar Gerfanov (Admin)
Thanks for letting me know. Everything fixed now and running faster than ever.