By Timberwerkz
March 27, 2023, 8:49 am
Coating Al2O3
Which coating would i select for Al2O3? Thanks in advance, Chris
Latest Responses
- Circle/Ramp can't select ramp plunging
- Add TiB2 coating?
- Ball endmill/surfacing example
- Drilling - Cutting Force is Broken
- The RPM seems to max out at 10,000
- Tormach PCNC 440 / lower horsepower machine best practices for building CAM using Fusion360 and HSMAdvisor
- Am I using HSMA incorrectly?
- HSMA speeds and feeds with plastic and O-flutes
- High Feed end mill configuration
- molybdenum
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
Eldar Gerfanov (Admin)
Hello, it looks like it works much like TiCN coating, but to add the coating, I need the tool manufacturer data. Do you have a couple of links for the tools you use?
Timberwerkz
Will this work? https://www.iscar.com/products.aspx/countryid/1/productid/73 https://www.iscar.com/eCatalog/Grade.aspx?grade=IC8250&item=5567471&fnum=3544&mapp=IS&app=282
Eldar Gerfanov (Admin)
Hello, It looks like this coating mainly increases the tool life, but it doesn't contribute to the cutting speeds and feeds. I think it is safe to use the whatever underlining coating the manufacturer uses. The one in your link is TiCN. It is safe to use that one. I will do more research and try to think of a way to support multiple coatings.