By ddexdd

March 2, 2023, 6:51 pm

Tool size limited to two digits

I looked for an option in settings but didn't find a way to increase the number of decimal points shown for the tool size.

Example, for a 5/32" reamer the diameter is 0.15625" but when I click the printer icon to print feeds and speeds report. It shows the cuttter size as 0.16" diameter.

The window on the right hand side that shows cutting data also rounds the cutter diameter to 2 digits.

Can this be increased to show at least to the 0.001" for inch cutters?



cant leave messages here
Pages:(1) [1]

Eldar Gerfanov (Admin)

March 24, 2023, 4:22 pm

Hi, Thanks for the report.

Added this to a backlog. Should be done in the next update.

Best regards.

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here