By paulvella
August 10, 2022, 3:17 am
mm/sec units
Can an option be added to use mm/sec units instead of m/min ?
Latest Responses
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
Eldar Gerfanov (Admin)
Hi, m/min and mm/min units are standard in displaying the Cutting Speed and the Feed Rate when CNC machining. Are you talking about cutting speed or the feed rate? Regardless. Unfortunately, the cost of maintaining this feature is prohibitive and does not add value for most users.
Clint_DK
I would also like to see the option added to have the feedrate displayed in mm/sec. It is handy for smaller hobby based CNC machines that we use. Most hobby based CAD/CAM design software also asks for these values to be entered in mm/sec resulting in having to manually recalculate everytime. It should not really be a major extra burden to incorporate and maintain in FSWizard as it only requires one option switch with a simple conversion formula associated with it.
Eldar Gerfanov (Admin)
Hi,
I added this feature to the backlog.
It should be in the next release.
Best regards.