avatar

By jday57

April 4, 2018, 3:53 pm

Crucible (CPM 10V) vs Uddeholm (Vanadis 10 SuperClean)

We machine CPM-10V and CPM-15v at our shop. I am wondering if selecting Uddehlm Vanadis 10 SuperClean is an equivalent material to CPM-10V for calculating cutting parameters? As far as CPM-15v I would think is a different animal. If there is something equivalent that is already on the list could you give a recommendation? If not could you add these materials in the future? Here is a link comparing cpm10v and vanadis 10 superclean www.zknives.com/knives/steels/steelgraph.php?nm=cpm+10v%2Cvanadis+10 cpm10v link www.hudsontoolsteel.com/technical-data/steel0V cpm15v link www.hudsontoolsteel.com/technical-data/steel5V Thank you, Jesse

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

April 5, 2018, 10:49 pm

Hi, With quick search it seems CPM v10 is very much like D2. So i would suggest using either D2 or H13 tool steels. Vanadis 10 is a harder powder metal. I need to do some reasearch where exactly they fit and add them to the list in the next update. Thank you!

avatar

jday57

April 11, 2018, 1:28 pm

THANK YOU!

avatar

jday57

April 13, 2018, 5:19 pm

UPDATE: I AM FINDING THAT CPM-10V'S CUTTING PARAMETERS ARE ABOUT 55% OF D2. MUCH MORE WEAR RESISTANT THAN I HAD EXPECTED...

avatar

jday57

April 18, 2018, 12:32 pm

CURRENTLY USING 30-35 SFPM DRILLING WITH COBALT PARABOLIC TIN COATED DRILLS.

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here