By iang
February 28, 2018, 10:45 am
Metric Imperial
Hi i seem to be having problems with metric to imperial display see attached snip is anyone else having these issues Ian
Capture.JPG
Latest Responses
- Circle/Ramp can't select ramp plunging
- Add TiB2 coating?
- Ball endmill/surfacing example
- Drilling - Cutting Force is Broken
- The RPM seems to max out at 10,000
- Tormach PCNC 440 / lower horsepower machine best practices for building CAM using Fusion360 and HSMAdvisor
- Am I using HSMA incorrectly?
- HSMA speeds and feeds with plastic and O-flutes
- High Feed end mill configuration
- molybdenum
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
Eldar Gerfanov (Admin)
Hi, Indeed there is an issue with display units on the floating window.... I will fix it in the next update. Thanks! :ernaehrung004:
Stevemanchester
Hi I'm using the android version 1.516 and when set to mm the display only shows imperial for feed, Vc and fz. Am I missing a setting. Thanks, Steve
Eldar Gerfanov (Admin)
Hi, This is by design. Results and Tool data have iindependent units. Tap on the blue header and select your Results units there too. Regards!
Stevemanchester
Great tried it this morning. Thanks.