Is there a way I can import a Grob G520 twin spindle 5 axis machine? I'm trying to set up the machine database, but this machine is not on the drop down list.
Thanks,
Jason
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
Administrator
Hi,
I will look into it today.
To make my job easier, could you send me more info on the particular configuration you have and a Power curve if you have one.
Best regards.
jmcd1026
Updated by: AdministratorAugust 29, 2017, 2:15 pm
http://www.techspex.com/machining-centers/grob-systems-inc(3046)/5765#
Administrator
Thank's. I will check it out.
jmcd1026
Thanks Eldar!!
Jason
Administrator
Updated by: AdministratorAugust 30, 2017, 1:59 pm
Hi Jason,
You can use Download button on machine profiles dialog to download the GROB machine with the spindle option that you have.
I do no know which spindle option you have (i guess you will still have to figure it out), so i added ALL spindle types offered by GROB.
I set 77% warning level for all machines to represent the continuous load curve that they listed. At 100% that would be the peak load curve.
Regards!
jmcd1026
Thanks Eldar!!!