HSM Support Forums>HSMAdvisor Support Forum>Need to Create or change P20 material

New user help with entering values by Administrator on May 24
Tool stick-out invalid by User10807 on May 11
Thread mill RPM and resulting Feed by User10805 on April 26
Coating Al2O3 by Administrator on April 8
Contant Surface Speed IN LATHE by Administrator on April 3
Resulting RPM was reduced because of the lenght of the tool? by Administrator on April 2
Tool size limited to two digits by Administrator on March 24
Cannot Update Tool Parameters by Administrator on March 19

Forums >>HSMAdvisor Support Forum >>Need to Create or change P20 material

Need to Create or change P20 material

Dear Eldar,

I work with P20 Material. But in your Database, you have it set to 330 Brinell.

I need to copy this P20 Material and change the Brinell to 272 for 28 Rockwell C.

The reason for this is because I am working with P20 Material that is 28 Rc.

Thus the SFPM will be faster for a softer Material. Id like to be able to change

The Hardness by entering in my own hardness and then have the SFPM adjust automatically to the new hardness.

But I don't see a way of doing this in your Software.

If I could Copy the P20 material and then change the Brinell in the Copy that should make the SFPM adjust to a faster
SFPM and RPM.

Thanks Glenn

Answers:

cant leave messages here

Pages:(1) [1]

Hi,

I gave a long answer in the previous post,

But here I see clearly what exactly you need.
I will try to add it in the next update or so.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here

Resources and Software For High-Performance CNC Machinists

By glennd

Need to Create or change P20 material

Administrator