Latest Responses
Username:
Password:
avatar

By Blue_Chips

July 21, 2015, 6:42 pm

New Lathe infeed clairification.

Hi Eldar,
Thanks for the infeed addition.
It has however created some confusion on my part as to the what I am seeing.

The infeed results seem to be based upon feeding with the cross feed when it has been my practice (and how I was tought) for many years to use the compound infeed (except for the very last cut) and don't believe I am alone in that.

Also the terms UN and UNR/V used in the height and infeed amount are unknown to me and I wasn't able to find any direct or specific information that clarified that when searching the web.

Thanks much

Ken



Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov

July 21, 2015, 7:10 pm

Quote:
The infeed results seem to be based upon feeding with the cross feed when it has been my practice (and how I was tought) for many years to use the compound infeed (except for the very last cut) and don't believe I am alone in that.

It is calculated for the compound infeed.
However i do realize now that i should have been half of that because the graduation will be showing radial distance.
I will have to fix that later.

Quote:
Also the terms UN and UNR/V used in the height and infeed amount are unknown to me and I wasn't able to find any direct or specific information that clarified that when searching the web.

When Root Radius is entered UNR / V row will be displaying thread height of the UNR form thread.
Otherwise straight V will be shown which has 0 root radius.


Let me know if there is something else wrong/not clear.

Regards.

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here