By gulch
February 18, 2015, 10:25 am
1018 material
Did you remove 1018 in the last update or am I blind? I have v1.141 Thanks
Latest Responses
- Circle/Ramp can't select ramp plunging
- Add TiB2 coating?
- Ball endmill/surfacing example
- Drilling - Cutting Force is Broken
- The RPM seems to max out at 10,000
- Tormach PCNC 440 / lower horsepower machine best practices for building CAM using Fusion360 and HSMAdvisor
- Am I using HSMA incorrectly?
- HSMA speeds and feeds with plastic and O-flutes
- High Feed end mill configuration
- molybdenum
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
Eldar Gerfanov (Admin)
I must have accidently deleted it when i was adding new materials. Sorry. I will bring it back in the next update Thank you. Regards.
Eldar Gerfanov (Admin)
Well. I looked at past releases and could not even find if 1018 was in there to begin with..... Anyway, it has just been added in the version 1.143. Thank you.
gulch
Thank you. It was definitely there, because that's one of my main materials that I use with this tool :)