How do I input the tool data for a single flute fly cutter such as the TORMACH SUPERFLY FLY CUTTER. http://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=32428 Thanks Bill
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
Eldar Gerfanov (Admin)
You can set it as a single flute indexed face mill. Set shank diameter to 3/4" Also start very shallow and slow. Go maybe 0.02" per pass at 30% feed override. See how that goes. Ane maybe bump it up a notch.