The V-BIT ENGRAVER effective dia I get when I input a .020 tip dia with a 90 included angle and .010 depth of cut is .030. Calculated manually it is .040; .020 tip dia plus .010 on each side. When SLOT/POCKET is checked the WOC changes to be the same value as the tip dia. I must be missing something here. Can you help. Thanks Bill
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
Eldar Gerfanov (Admin)
Hi, I just checked it. There is a bug in the program. I forgot to add the second side. It will only affect cutting speed though. I will fix it in next update in a day or two. Thanks for letting me know!:ernaehrung004:
Eldar Gerfanov (Admin)
Hello again. I have just uploaded an update where amongst other things this issue was tackled. Thanks!