Resources and Software For High-Performance CNC Machinists
Email or Username:
Password:
Register Forgot Your Password?
Forums >>HSMAdvisor Support Forum >>NOTICE: Application crashes when moving SFM override to 0% [FIXED]
avatar

By Eldar Gerfanov (Admin)

October 2, 2013, 11:31 am
Updated by: October 2, 2013, 9:21 pm

NOTICE: Application crashes when moving SFM override to 0% [FIXED]

A problem has been found in the 0.601 release. Whenever SFM override is pushed all the way to the left, application crashes. This then gets saved to the settings file and will not let you start the program normally next time. In order to clear the error you should navigate to the folder where HSMAdvisor is installed. There you have to locate and delete file called settings.XML After this is done program will start normally. Sorry for the inconvenience. Problem will be fixed as soon as possible.

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

October 2, 2013, 9:21 pm

Problem has been fixed in version 0.602 Please download and install it to fix the problem.

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here