By Blue_Chips
February 25, 2013, 12:51 am
Updated by: February 28, 2013, 12:38 am
Updated by: February 28, 2013, 12:38 am
[RESOLVED] Deleting machine Definitions is crashing program.
Deleting seems to work fine untill you get to where there are only two left and then it errors with a "Unhandeled Exception" , you can continue but not able to delete at that point.
Eldar Gerfanov (Admin)
Oh GOD! 1.30 AM in here. I will fix it tomorrow As a temp fix you may refrain from deleting them :) How do you like the idea/implementation though? Want something added while i am at it?
Blue_Chips
This should be very benificial for larger shops, with only one CNC here it is still a good thing. You had the Haas TM-1 already there so am good here. Did notice that when editing the definetions for a specific machine and click OK it jumps to the next machine in the list upon exiting. Thanks
Eldar Gerfanov (Admin)
Okay the problem has now been fixed. The update is already available on download page. Enjoy. Don't hesitate to inform me of other problems.
Blue_Chips
That problem is now fixed. There is still a little issue where you boot the program, the proper machine is active and you click the edit machine definitions then cleck exit, the max HP seems to round up, in my case from 7.5 to 8. Easy to duplicate so you should be able to see first hand. Thanks Ken
Eldar Gerfanov (Admin)
Updated by: Eldar Gerfanov (Admin)February 28, 2013, 10:55 pm
Fixed/Improved the way Machine Profile is handled on tool/Cut load You can download an update now. Thank you for the information.