Hi there: IF I change the number of teeth The Feed and fz changes. I am perplex as to what formula FS wizard uses to get fz when number of teeth is changed? Thanks for the help OMAR
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
Eldar Gerfanov (Admin)
Whenever you increase number of teeth you decrease space available for chips. Also you increase cutting force on the tool. Scientifically i must calculate volume of chips produced per revolution and compare it to the available clearance volume. But because it is not possible, i go away simply by reducing chip-load.
omar
Updated by: Eldar Gerfanov (Admin)July 18, 2014, 7:08 pm
Hello Zero_Divide: Scientifically is there a way to build a formula to calculate fz when the number of teeth is changed. How would the formula look? OMAR
Eldar Gerfanov (Admin)
There is no scientific formula. I think i just reduce chipload by 10% or so for every tooth. This is in fact what most tool manufacturers show on their charts. Are you sure you are not building another calculator yourself?
omar
>Are you sure you are not building another calculator yourself? yea I am building one with basic formulas for my handheld calculator it's no way close to or will ever be close to your program omar