By tonyj244
March 27, 2014, 11:39 am
larger thd dia's added
Hi ,great product .Just asking if larger od and id thd info can be made available up to 12 in or so? I love what you have in info now .
Latest Responses
- Drilling - Cutting Force is Broken
- The RPM seems to max out at 10,000
- Tormach PCNC 440 / lower horsepower machine best practices for building CAM using Fusion360 and HSMAdvisor
- Am I using HSMA incorrectly?
- HSMA speeds and feeds with plastic and O-flutes
- High Feed end mill configuration
- molybdenum
- Which coating select for a TiSiN endmill?
- Attaching custom S&F's to specific cut parameters possible?
- Typo in G76 example G-code
© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.
You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here
tonyj244
I guess the info would fall under the Threads tab.Just great info .I guess the thd pitch would be too odd to chart it that way.Logic would be required to do the calculations,may another source would be best .Sorry
Eldar Gerfanov (Admin)
For threads up to 12" and more in diameter you would need a calculator that can calculate them from scratch. Usually such threads have custom pitch sizes and it is impossible to put it into the table.
I would recommend Thread Pal by Michael Railey. He spent a long time developing his program, and it is all about custom threads of different pitches, forms and sizes.
Maybe later I too will do something like that. But for now I am busy enouh developing the speed and feed calculator.