Subscribe to Blog
Email Address
Pages:(35) 1 2 3 4 5 [6] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

HSMAdvisor Plugin for MasterCAM 2020

July 23, 2019, 6:50 pm by Eldar Gerfanov (Admin)

Because the latest version of MasterCAM 2020 was just released last month, we too had to create an updated version of HSMAdvisor plugin.

As usual you can get it here:

There were quite a few changes on the back end, but users would not notice any of them, so why bother with proper release notes?

Just download, install and enjoy!

Do not forget to tell you MCam-loving friends about HSMAdvisor!


New video: FSWizard Machinist Calculator

June 25, 2019, 10:49 pm by Eldar Gerfanov (Admin)

Better keyboard in FSWizard

June 5, 2019, 11:11 pm by Eldar Gerfanov (Admin)

This major and long overdue update brings customizable virtual keyboard layout (in settings) and new updated style that feels more native to both iOS and Android than what we had before.

See screenshots.


Screenshot_2019-06-06-00-06-25~2.png Screenshot_2019-06-06-00-06-25~2.png Screenshot_2019-06-02-19-49-34~2.png Screenshot_2019-06-02-19-49-34~2.png Side By Side FSWIZ_keyboards.png

New goodies in FSWizard!

May 27, 2019, 10:56 am by Eldar Gerfanov (Admin)

Version 1.605 brings us the following new features:

  • Width of Cut for milling tools can now be set as percentage of the tool diameter.
  • Speeds and Feeds page now has bigger header with more information and bigger fonts.
  • Added pilot hole for taps and readers to the cut info pane.
  • Improved the functionality of the Scientific Calculator.
Screenshot_2019-05-26-23-21-59.png Screenshot_2019-05-26-23-21-59.png

HSMAdvisor v1.600 More International Support

April 27, 2019, 8:40 pm by Eldar Gerfanov (Admin)

You know this is good...

when we bump a whole TENTH in the version number!

This release focused on fixing various small issues blah-blah.

The main news is the HSMAdvisor's Translator Form that can now not only Upload, but also Download languages from the cloud!
Which means you can now download someone's unfinished translation file, use it, add to it (hopefully) and upload it again!

When you download someone else's language file with the same name as yours, only the untranslated lines will be updated.

From this point on I will be adding languages that contain certain percent of coverage to the installation.
Installed languages will also be updated as time goes on.

At this point we have the following list of installed languages available:

  • English (main)
  • French (full)
  • Russian (full)
  • Spanish (almost full)
  • Slovak(partial)
  • Czech (partial)
  • Polish (partial)
  • Turkish (partial)

Huge thanks to everybody who contributed to the translation effort!
So if you did, please contact me if you need any licenses (have your user name handy, so i can identify your work).

By the way, do i need to remind that good things happen to those who contribute?

Keep tuned for more cool updates to come out this spring!


Updated Translate Capture_Translate.png

HSMAdvisor Machine Cloud Fixed !

April 9, 2019, 9:38 pm by Eldar Gerfanov (Admin)

I have been really busy lately working on the large update for HSMAdvisor- Mastercam plugin that it totally slipped from me that Machine Cloud services were down.

Just had it fixed.

Thanks to everybody who reported the issue!

Best regards.

HSMAdvisor Machine Cloud Capture_MachineCloud.PNG

FSWizard v1.6

March 3, 2019, 11:23 am by Eldar Gerfanov (Admin)

FSWizard Machinist Calculator Update that iOS users will like: new big drop-down select boxes replaced the standard iOS spinners make it easier to select Tools, Tool Materials and Coatings. Because of this we will soon also be able to show tool images as well!

In this update a lot of work was done to make it work flawlessly for iOS devices.

Check it out here:

Screenshot Screenshot_2019-03-01-07-40-20.png

Save 50% on all purchases! EXTENDED

December 26, 2018, 4:26 pm by Eldar Gerfanov (Admin)

Update: I have received emails saying that lots of people's purchasing and accounting departments were closed during this time, so the sale has been extended by one week until January 12!

7 Years in Business!

The only deal of the year starts on December  28 and will last until January 3 (Extended till January 12)

Only during these 5 days you will be able to save 50% on any and all HSMAdvisor and/or FSWizard packages, sold on our store!

Do not miss the only deal of the year!

Merry Christmas and a Happy New Year!!

HSMAdvisor 1.538 For MasterCAM!

December 22, 2018, 8:44 pm by Eldar Gerfanov (Admin)

The HSMAdvisor hook for MasterCAM has been updated!

  • Updated HSMAdvisor Hook to the latest improvements of HSMAdvisor standalone app:
    • Tapered End Mill Display: The work-piece material boundary now matches the angle of the cutter.
    • Shoulder Diameter: Default shoulder diameter is now equal to either the diameter of the Shank or top of Fluted portion, depending on the tool configuration.
    • Tool Ordering: Fixed ordering issues.
    • Improved Default Tool Library behavior.
    • Added Kovar material
  • Fixed Set Material issue in MC2019

New Dark Theme for HSMAdvisor Machinist Calc

December 6, 2018, 7:01 pm by Eldar Gerfanov (Admin)

HSMAdvisor Machinist Calculator is now sporting the new even cooler look!

HSMAdvisor Dark Theme

Check out the new version over here:

Pages:(35) 1 2 3 4 5 [6] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
Sing In

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here