I would like to announce the launch of a brand new product called HSMCode.

HSMCode combines the power HSMAdvisor speed and Feed calculator, its advanced Tool and Cut Database and the new functionality of HSMCode into one seamless product!

What does HSMCode Do?

HSMCode allows you to create ToolPaths from imported CAD or Solid geometry with ease.

All you need to do is pick features that need to be machined and HSMAdvisor will pick the most suitable tool, calculate proper speeds and feeds and then HSMCode will generate the G-Code for your machine

As simple as that.

You can also create additional geometry using an in-built CAD designer and Simulate your Toolpaths to verify the correctness of your work.

The sales will begin in a couple of months on June 31 2016!

Please contact me if you would like to test the early demo version, affect the development of the software and (depending on the value of your input) receive your Lifetime Subscription for free!

Cheers!

Don't you hate when "that guy" cuts your stock a little too short?

Holding on to just 0.060" here. The part is 1.5" tall made out of 4140, which helps it stay in place and not collapse under machining pressure. Pretty sure it would have moved if it was made out of mild steel.

PS. Did I eay I love those CR vise? I do. Can't lift that jaw with a lift truck.

It does not annoy me anymore!

Originally this part was programmed for and machined in 6061 aluminum, but when production run came, material was changed to HRS and then to SPS (4140).

Luckily reprogramming using HSMAdvisor hook for MasterCAM is a bliss.

Mere 5 minutes and all speeds, feeds, depths of cut, etc. were changed to safe and productive values.

New Material

Being a CNC Machinist/Programmer is sometimes more than simply creating a program and machining the actual part, often times it is about creating efficient and accurate fixturing.

In this little project:

I had to machine rectangular cut-outs and drill holes through an already-turned steel ring. Then I had to part each ring to 4 equal pieces.

There were about 100 such rings that worked out to 400 pieces in total.

After drilling holes on an indexer I had to machine a fixture to hold my part through 2 remaining set-ups.

First half of the fixture consists of the expanding mandrel:

The work-piece would be mounted on it like so. A hole on the side is used to properly position it:

Read More 

Being a professional CNC Machinist myself with a good manual background I often find myself watching various machining videos and blogs.

Unlike others I do not often share somebody-else's work, I could just not walk past this one and not tell everybody how great I think this is....

This story was posted on "Russian reddit" and here is the direct translation of the author's post:

Lets begin with tyres. Vladimir (guy's name) decided to create the mould to make the rubber tyres himself. Here it is:

Here are the tyres he made with it. Beautiful aren't they?

He also made little differentials. Housings, gears. Everything made himself:

Read More 

Every month we are getting a good amount of feedback and suggestions.

Everything is getting prioritized and eventually implemented. Urgent stuff is getting done fast. And other "nice to haves" are getting pushed down according to their usefulness / difficulty (yes, everyone secretly wishes my program could also edit and create HSM g-code :)).

It is amazing, but almost half of HSMAdvisor's features were originally suggested by our loyal users!

The latest update HSMAdvisor 1.213 addresses some of the feedback I have received last couple of months.

So the New features are:

1. Smart Depth and Width of Cut (DOC/WOC) suggestion (user suggested)
2. Compressing of Shared Tool DataBases
3. Display of Stock status on Tool DataBase tables (user suggested)
4. Various little improvements like new Heli-Coil reference, better DOC/WOC calculation better multitasking, etc. (mostly based on user feedback)

Let's go over the most important ones here:

Read More 

There has been changes to HSMAdvisor CNC Machinist Speed and Feed Calculator Licensing Options!

From now on All new HSMAdvisor license purchases include access to FSWizard PRO for your mobile devices.

When a 1 or 3 year HSMA Subscription License is purchased, the FSWizard License will be issued for the same 1 or 3 year length of time.

When a Permanent HSMA license is purchased, your FSWizard PRO will be a permanent type as well and will never expire.

Happy Upcoming Holidays!!!!

Cheers from the whole Zero-Divide Family!

I personally use HSMAdvisor at work every day and trust its results 100%

I have to say my program now knows about machining more than i do. I certainly can not remember cutting speeds and feeds, reduction factors, depth of cut and a ton of other information for every material I have ever cut.

Now add to that the various possible combinations of tool/material/coating and it becomes a no brainier, that a good speed and feed calculator like HSMAdvisor saves a ton of time and money by improving your tool life and productivity.

It is not only good for HSM (High Speed Machining) but also for general machining, drilling tapping, you name it.

The algorithms it employs are far superior to what other calculators are using. Take for example the real-time depth of cut/deflection optimization, that other calculators do in a separate window and take a few seconds to complete.

Here is a quick video lesson where i show the steps involved in creating a simple contouring toolpath in MasterCam x9:

And here is the video of machining the actual part:

Sometimes I get asked whether hsmadvisor CNC Machinist Calculator is reliable enough out of the box.

I and many others test it at work every day. This 2"x1.5"x1.25" 4140 PH piece was programmed on masterscam with hsmadvisor speeds and feeds with all overrides set to default.

Worked out fast and awesome. As usual!

14497779489640.jpg

I regularly follow practicalmachinist.com forums.
Especially the cnc machining section of it.

I notice when CNC Speeds and Feeds questions come up people often suggest my HSMAdvisor Machinist calculator.
A referral by a satisfied customer is the best referral in my opinion. Thank you to everyone doing this great favor to me and my prospective users!

Other times users of HSMAdvisor question speeds and feeds it generates and instead of going to me, they ask on forums.
Which is always fine, because extremely often "wrong" results mean something wrong in users expectations or the data he feeds the calculator

In the process of discussion it usually turns out that the calculation results were correct, but because user decided to use a depth of cut or tool length, larger than he should have, HSMAdvisor compensates and gives a very conservative feed rate.

Just like in this forum post over here: Engraving with a 1/32 ball mill machinist wanted Read More