We all have heard hundreds of times that when chatter is happening during machining, we should reduce our feed rate. The same advice we also hear for compensating for extra-long tools and unstable setups.

Let me explain why I think this is mostly incorrect.

Let’s list  the effects of reducing the feed rate:

1. Reduces tool life.
2. Reduces productivity.
3. Increases deflection.
4. Causes chatter.

Let me explain from my own experience and research I have made each of these points and a simple way to avoid chatter's adverse effects.

Needed to do alot of side drilling/milling/tapping on our moulds lately.

So I quickly designed and whipped up this custom indexing fixture that allows me to mount almost anything to it.

Face plate has several tooling dowel holes on front side to locate work piece.
On the back of face plate there are 36 3/8 dia reamed holes spaced 10 Degree apart.

Housing has a big 5.0"Dia pocket in the front into which the face plate's hub fits in with 0.001" clearance
Housing also has corresponding 3/8dia reamed holes spaced apart 9 degrees. This allows me to index the face plate with 1 degree increment.

Design time:2 hours, Machining time: 2 hours.

Pictures are here: