Optimizing Peck Drilling for Deep Holes

Peck drilling is often necessary when machining deep holes. However, with the correct feed and speed settings, pecking is unnecessary for depths up to:

• 3× diameter for standard drills
• 5× diameter for high-performance parabolic drills

For deeper holes:

• Up to 10× diameter → Up to 5 pecks for regular drills, and up to 3 pecks for parabolic drills
• Beyond 10× diameter → Constant pecking is required:
  • 0.5–1× diameter per peck for regular drills
  • 1.5–2× diameter per peck for parabolic drills

Since programming requires specifying a peck amount, here are the recommended values:

Read More 

As part of FS Wizard's development. 2 drills were tested today on T6061 Aluminum.

0.312 Dia and 0.390 Dia Dormer A002 Drill Jobber Drill with TiN coated tip.

Helix:30Deg

Point:Split, 118Deg.

Hole depth for both was 3.0"".

Peck equaled 1xDia

Speeds and Feeds for 0.312 Dia drill were

Read More 

Tool:0.281 dia 0 helix TIN coated carbide drill

Lately we've been doing alot of anvils out of 3/8 or 1/2" Hardox steel (Rc 45-50)
Aside from having to machine profiles and pockets we also have to drill some mounting holes.

Read More