You know this is good...

when we bump a whole TENTH in the version number!

This release focused on fixing various small issues blah-blah.

The main news is the HSMAdvisor's Translator Form that can now not only Upload, but also Download languages from the cloud!
Which means you can now download someone's unfinished translation file, use it, add to it (hopefully) and upload it again!

When you download someone else's language file with the same name as yours, only the untranslated lines will be updated.

From this point on I will be adding languages that contain certain percent of coverage to the installation.
Installed languages will also be updated as time goes on.

At this point we have the following list of installed languages available:

• English (main)
• French (full)
• Russian (full)
• Spanish (almost full)
• Slovak(partial)
• Czech (partial)
• Polish (partial)
• Turkish (partial)

Huge thanks to everybody who contributed to the translation effort!
So if you did, please contact me if you need any licenses (have your user name handy, so i can identify your work).

By the way, do i need to remind that good things happen to those who contribute?

Keep tuned for more cool updates to come out this spring!

Cheers!

Updated Translate

HSMAdvisor Machinist Calculator is now sporting the new even cooler look!

Check out the new version over here: https://HSMAdvisor.com

I personally would like to wish every one of my supporters Merry Christmas and a happy New Year!

I like to consider every sold seat a start of new partnership with the goal of making Your work easier and more productive every day.

New year will bring lots of very cool developments and I am glad, that since all of the licenses we sell never expire, every single on of my customers will be able to enjoy the latest improvements.

Cheers and Have Great Holidays!

3D Prining is about to to take over traditional machining the same way CNC Machining took over manual machining.
Eventually 3D printing will replace casting too.

Since 3D Printing does not require complicated setup and programming, this in turn will lead to massive loss of machining-related jobs.

Read more to see if this is true!

Read More 

FSWizard: Online now has Service workers!

It is a cool new technology that allows otherwise online applications to run completely offline.

From now on FSWizard will be able to cache all of its files on your mobile or PC device.

Also a reminder: you can "Install" FSWizard right from your browser by going to menu and hitting "Add to Home Screen"
Then FSWizard will be able to run in full-screen mode.

Depending on your usage, Chrome may actually prompt you to do that automatically.

Cheers!

We have many helpful articles over at HSMAdvisor Help portal. But beacuse of that very reason not many website visitors actually read any of them.
It is a pitty that most advanced users will never actually visit the help section, because they already know how to operate HSMAdvisor.

And this particular one, I believe, is too useful (I just updated it to include more info) for my customers and other machinists to keep it burried in some help section that few ever read.

So here you go:

Read More 

Before we start milling away our stock we first need to get down to the required depth.

This is not a problem with external features when we can plunge outside.

When machining closed pockets, however, we need to find a way to get down to the machining depth first.

As usual there are several ways to get the job done. The plunging methods listed here are not ordered by their preference.

For various machining operations on different materials some may be more preferable than others.

Straight Plunging into a larger Pre-Drilled hole

This is one the best ones in my opinion.
Very few machining modes can compete in effectiveness with drilling and this method will get you the best combined tool life on most materials and (in case of many deep pockets) the least machining time, even when tool change time is factored in.

Read More 

HSM with MasterCam Dynamic Milling has long been one of my favorite toolpath strategies when machining hardened and tough to machine steels.

The job at hand was to machine out a 5" disk out of pre-hardened 4340 steel. About 43RC hard.
Due to an island in the middle (leaving only 3/4" room for the tool) I could not use a bigger indexed cutter, so i decided to use the adaptive clearing toolpath.

I started out by calculating Speeds and Feeds with HSMAdvisor and come up with the following starting parameters:

Full depth, at 10% engagement.

Which worked just fine. But the tool was not new and I decided to sacrifice it in the name of science and maxed it up to see how long the tool was going to handle it.

So I adjusted the cutting speed to 170% and feed to 150% (which accounts to heavy roughing):

To be honest I was not sure the tool was going to last very long, but it exceeded all my expectations!
It lasted for about 2 hours and completed the whole run of more than 20 pieces.

I even took a video cutting one of the parts:

Note how there are no sparks coming out. This is because the chip is thick enough to not overheat. This works both ways. Chips stay cool and due to their larger mass carry most of the heat away from the cutting edge.

After the end of the run (and it was not new to begin with) the tool looked like it could do as much!

There had not been any updates to HSMAdvisor for several months now.
And there is a very good reason for that.

We have been working hard on a lot of new super-cool features and improving the old functionality.

BTW: This Update Resets the Trial Counter!

Let us cut to the chase.
Here is a list of all the latest changes and improvements:

• New Cut Cloud controls added (beta only!)
• New Cast Aluminum materials
• New combined Tool Torque and Deflection Limit controls
• New and Improved Tool Display Graphics. Now for Turning too!
• Lathe Tools now consider Shank size when suggesting chip-load.
• New Mass Edit - > Set SFM/Feed Overrides command in the Tool Database
• Improved Tool Deflection calculations
• Improved and refined a lot of behind-the-scenes stuff

I am going to explain the most important improvements below.

Read More 

Have you ever wondered how much tool life can deteriorate when using coolant with High-Speed Machining (HSM)?
Or maybe you never really saw the boost in tool life when using HSM techniques because you had to use coolant?

Well, here is a test result I just got from running the same tool at the same Speed and Feed with and without coolant.

Read More