Check this out, guys.

Been working on this for the past couple of weeks:

New FSWizard Speeds and Feeds Calc will have not only modern improved design. But latest tools and materials.
Special attention is being paid to have it produce EXACTLY the same results as our HSMAdvisor desktop app.

It is not complete yet, but it is almost there - making it catch up to the latest HSMAdvisor code is a big job.

The new calculator will replace our online calculator as well.....

Yes, you heard that right! You will be able to run exactly the same FSWizard Speed and Feed calc on your mobile phone, desktop and even Windows Mobile.

Heck, it will even work on Mac!

Best of all, it will be published as an update to our existing apps, so our existing customers will not have to buy an upgrade, unlike what some other "Machinist Calculator" has done in the past.

I will keep you posted.

Cheers!

Hello everybody!

I have not made many blog posts here lately because i have been working a lot on new features and simply did not have much time for anything.
So I decided i'd make a little report on how we are doing and where the project is.

First things first.

I just released an update to HSMAdvisor v1.503

• Drilling tools now consider Shank Diameter when calculating maximum allowed torque on the tool.
  This will lead to more safety when using, say 1" tool with a 0.5" shank.
• Thread Milling tools have been immensely improved.
  Shank diameter is now included into the calculations.
  Default Length is now 2.5 diameters
  Improved suggested cutting speeds and feeds

Our Multiple Language Translation Program is chugging along nicely

Several people messaged me about intentions to build translations so far.

At this point we have people working on translations for the following languages:

• Croatian
• Serbian
• Portuguese
• Perhaps Polish (I see someone uploading translations, but the person have not contacted me about it)

Mobile FSWizard app is due for major improvements

Major visual re-design is under way and we are working on making FSWizard Mobile accessible on more devices in more ways.
It is going to be a fully fledged WEB app, that can be run on any internet-connected device. Even on a desktop.

Integration with HSMAdvisor Machine Profiles and Tool Libraries is also planned.

Perhaps we are going to drop native support for Google Play and iOS stores. I am sick of them charging us 30% for their services.

HSM with MasterCam Dynamic Milling has long been one of my favorite toolpath strategies when machining hardened and tough to machine steels.

The job at hand was to machine out a 5" disk out of pre-hardened 4340 steel. About 43RC hard.
Due to an island in the middle (leaving only 3/4" room for the tool) I could not use a bigger indexed cutter, so i decided to use the adaptive clearing toolpath.

I started out by calculating Speeds and Feeds with HSMAdvisor and come up with the following starting parameters:

Full depth, at 10% engagement.

Which worked just fine. But the tool was not new and I decided to sacrifice it in the name of science and maxed it up to see how long the tool was going to handle it.

So I adjusted the cutting speed to 170% and feed to 150% (which accounts to heavy roughing):

To be honest I was not sure the tool was going to last very long, but it exceeded all my expectations!
It lasted for about 2 hours and completed the whole run of more than 20 pieces.

I even took a video cutting one of the parts:

Note how there are no sparks coming out. This is because the chip is thick enough to not overheat. This works both ways. Chips stay cool and due to their larger mass carry most of the heat away from the cutting edge.

After the end of the run (and it was not new to begin with) the tool looked like it could do as much!

Hello Frends,

After the latest changes in HSMAdvisor and addition of free features lots of people ask me to clarify (repeat?) what those are.

So those include:

1. Thread Reference.
2. All Geometry Calculators (Bolt Hole, Triangle, etc)
3. Screw Reference.
4. All Tool Database functions including access to Speeds and Feeds page where you can edit parameters of the tool.
5. Full Acess to Speeds and Feeds for One material (1018 steel)

Basically ALL functions except Speeds and Feeds calculations are included for Free.

Check it out here, if you haven't already : http://hsmadvisor.com
Regards!

As unhappy I am to learn that something may be wrong with the software I develop and love, negative feedback is essential in learning whether i am doing everything right.

So a couple of days ago I received an email from a somewhat disappointed user. 

He (lets call him Peter) was complaining that HSMAdvisor calculator gave him "excessively high" speeds and feeds for his 3/4" 4 flute 3.0 LOC  end mill in aluminum.

With the data Peter entered he was getting around 10000 RPM(SFPM 2117) and the feed of 270 inches per minute while usual practice in the shop was side-milling aluminum at that (2.8" axial) depth at only 325 SFM

After double-checking the numbers I replied that in fact his numbers seemed very slow and if for some reason he HAD to run that slow (heck, i machine most steels faster than 325 SFM) due to some conditions, perhaps, he was ought to change the conditions themselves.

This is what I am getting for Peter's end mill setup:

Read More 

This update fixes the no-message shutdown when your trial expires!