The latest release of HSMAdvisor is now available on Download Page

There have been many important improvemnts. So please download this update ASAP

• Important!: Add Tool Error fixed
• Expanding and then contracting window would sometimes cause layout to break. This issue has been fixed
• Layout problems when using non-standard Windows scaling were fixed.
• Window resize by dragging one of its edges has been turned on.
• Program Launch Time was improved

Recently i noticed that I (and everyone else) could not add new information to my website.

The issue affected everything. New support forum posts were getting rejected, you could not save online calculations and even automatic payments were not saving in my online database.

Turns out my hosting (the company that hosts my web sites on their servers) changed a bunch of settings from their end.

This caused all the issues many may have been experiencing.

Now everything has been fixed. In fact it only took me half an hour to fix things, but 3 days webservices were immobilized until i noticed the problem.

I also made some changes to HSMAdvisor program.

In version 0.811 i have fixed an annoying glitch that crashed the progam when less than 3 days were remaining on the trial.

It did not affect paying customers, but i guess it cost me a few of potential ones.

I guess it is another drawback of releasing updates as often as i do.

New Things:

• New "Indexable Drill" Tool Type
• Some tool will now have Usage Tips in the warning box, IE new Indexable Drill Tool type will have recommendations to use through coolant.
• New Buttons on Tool Geometry pane:
  [Edit As New] button allows to quickly drop current tool and use its data to create a new one
  [Add Tool] Allows to quickly add tool to the library of your choise
• Edit/Add Tool dialog now allows you to choose tool library when you add or edit tool information data into the database

Whats fixed:

• On systems where comma (,) is used to in place of a decimal point, selecting Tap tool type would throw an error.
  This glitch has been fixed in this update.

What's new:

• Revised chiploads for smaller endmills.
• Revised recommended Depths of Cut for different material types for endmills with various number of flutes.
• Improved Deflection model to include cutter lead angle.

In this update i have re-visited speeds and feeds area of the calculator.

Recommended Depth of Cut and Deflection calculation was revised.
At the same time Chiploads for endmills smaller than 3mm or 0.125" were reduced in half.

This resulted in most things regarding actual Speeds and Feeds remaining the same, but i believe this update works better as it considers material type and number of flutes to calculate recommended depth of cut.

Also Deflection calculation was changed for tapered endmills

This is a bug-fix update.

As it turned out usage of "Sticky RPM" caused the calculator to not work properly.

Also when in metric mode, Tool Manufacturer Cutting Speed was sometimes not updating properly.

All the problems have been fixed in this update.

Hello guys,

I have just uploaded a latest release of HSMAdvisor v0.801.

In this update i only added a few calculators to the new Reference Tab.

Lets review all those calculators here.
And since i last time got repremended by mr rlockwood for making my post too long and dry, i will spice it up with a ton of pictures and even a download link. BTW you can download the updated version over here http://hsmadvisor.com/index.php?page=Download

There are 3 new calculators.

Those are:

• Scientific Calc -a child of my labor over this weekend.
  The standard Windows calc was driving me crazy with its small buttons, so i whipped up this one. Maybe later i will make it a separate pop-up window or something
• Drll Point Calc - a handy tool that allows to calculate depth required to make a countersink of set angle, and tip flat size
• Partial Bolt Hole Calc- allows to find location of equally spaced holes laying on an ark. 

Here is a full list of calculators available at this point in the Reference Tab:

Scientific Calculator

Bolt Hole

Bolt Line

Drill/Countersink Point Calculator

I plan to keep adding more and more new calculators and features and improving existing ones.

Should you have any suggestions, please let me know.

I think it is time to reflect on latest changes to our HSMAdvisor and look at survey results.

Thanks to your input I was able to make changes that I believe addressed some of the issues you guys were having.

You can download and try HSMAdvisor for 30 more days here http://hsmadvisor.com/index.php?page=Download

This update resets your trial counter back to "30 days left", so if your old trial expired, you can use it for one month more.

First of all, I put all of the available overrides on plain sight. Now you do not need to expand a panel to access speed/feed overrides.

I also added cutting speed and chipload to the collapsed view.

Machine Panel now has  Max RPM on collapsed view.

Gages panel now is not expandable and has Read More 

Plugins Tab now has functionality to Download and Save webpages to your computer, so they are always available offline.

There is now an address bar on the bottom of the screen.
If you enter URL address and click go, you can load website in a new tab.

You can save it as one page by right-clicking on corresponding tab and selecting "Save Page on Disk":

Alternatively you can save your webpage in ".mht" format using Internet Explorer into HSMAdvisor\plugins\ folder.

Next time you launch HSMAdvisor, your saved web page will show up in Plugins Tab.

This is where all plugins are saved:

You can use *.HTML, *.HTM, *.MHT and *.TXT files.

If you have any Microsoft Word documents you would like to keep there as well, you can save them "As Web Page" and copy to the plugins folder.

This update resets trial counter back to "30 days left"!

New Things:

• New Reference Tab
  I am starting to port geometry calculators found in FSWizard:Mobile app to HSMAdvisor.
  You will be able to find them in ths tab. For now i have added 3 calculators: True Position, Bolt Line and Bolt Hole
• Ability to Download and save ALMOST any web page as a plugin.

Improved Things:

• Improved Scaling and layout when using larger Windows Font Size and lager App Font size.
• Changed position of several controls withing the app to improve usability.

Now lets look closer what has changed....

Read More 

Just wanted to let everybody know that the current sale will run until the end of April.

I also wanted to ask everybody again to participate in the survey posted earlier and help decide the major direction the software needs to be moving.

Edit: I have received very valuable feedback so far.

Please fillup the survey if you did not already.