HSMAdvisor v2.5.11 for MasterCam 2023 is now available at https://hsmadvisor.com/hsmadvisor_for_mastercam

The HSMAdvisor core was also updated for all Mastercam plugins from 2019 to 2023

Huge thanks for everybody who continues to contribute to this software and refer it to your colleagues!

Your ideas, your feedback, and your support are awesome.

Cheers!

Tonight I released the latest version of HSMAdvisor and the plugin for Mastercam 2022, 2021 and 2020

Most of the issues reported by our users have either been fixed or otherwise addressed.

It has bug fixes and an improved tool creation routine.

Additionally, the Tool Path Write dialog now has an option to disable the toolpath regeneration and the actual values that will be written in the toolpath:

The Save button saves the current state of checkboxes as default.

Mastercam plugin can be downloaded here: https://hsmadvisor.com/hsmadvisor_for_mastercam

The latest standalone HSMAdvisor version is available here: https://hsmadvisor.com/download

It has some back-end improvements plus additional materials.

Please let me know if you have any feedback or questions!

Inhouse Solutions has released their latest version of MasterCAM 2022 just this past Monday ...

I am sure it has lots of improvements, which I didn't yet have time to explore because I was busy porting the HSMAdvisor plugin to the latest version.

Without further adieu. Please download the HSMAdvisor hook for the latest Mastercam over here:
https://hsmadvisor.com/?page=HSMAdvisor_for_MasterCAM

As usual, please report any issues or suggestions to our support forums and/or my email!

Cheers!

Ever since getting my benchtop CNC running, I have not been very happy with the lack of manual control over overrides and buttons.

This DIY Engineering video gave me a great idea: build one myself.

I wanted the smooth speed and feed overrides, so I decided to not go with HID device, but instead with a full serial control paired with a custom plugin on the UCCNC side.

Here is the Fusion design of the enclosure:

And here it is 3D-Printed.
Acrylic face engraved from the back side and painted.
And all buttons and controls mounted:

All I have to do now is wire the Arduino board, program the plugin, and test it!

Update:

Here is the video of the pendant in action:

1. PCB Design

Design notes:

• All resistors used were 10K
• Speed and Feed potentiometers are 10K
  Their pinout goes Wiper->ground = 0%, Wiper -> +5V = 200%
• Axis and Handwheel Increment rotary switches are 4-position and their pinout goes like this:
  Axis select 1-X, 2-Y, 3-Z, 4-A, C-Common (+5V)
  Handwheel Increment 1-0.0001, 2-0.0010, 3-0.0100, 4-0.1000, C-Common (+5V)
• All function buttons such as Jog +/-, M1, M2, etc are sending +5V signals to the digital pins D2-D12
• D13 digital pin is connected to a LED indicator and is used to tell the user that the Pendant is allowed to send signals to the plugin.

Design files:

• Electronics Design: https://a360.co/3NGWRTP
• https://a360.co/3NLhfDk
• https://a360.co/3JObaVh 

2. Enclosure Design

https://a360.co/3fG3jgI 

If you don't have a 3D printer and/or a CNC Mill, please contact me and I will send you a 3d-printed enclosure and the 3d-printed or milled acrylic face plate:

• 3D-Printed Black PLA Enclosure (shown in pictures): 30$ + shipping
• 3D-Printed Black PLA Face Plate (optional): 15$ + shipping
• CNC Milled and Engraved unpainted (clear) acrylic Face Plate (shown in pictures): 30$ + shipping

3. Arduino Setup

• Install the Full Firmata library onto your Arduino Nano (Or any other Ardiono that supports USB Serial Communication): StandardFirmata sketch used for Arduino NANO is also added to the release package

• Please note that you might need to install Arduino USB Driver in order for your Arduino to work on the target computer!

4. UCCNC Setup

• Download the latest LEETArduinoPendant from the releases and extract it to your PC.
  https://github.com/swindex/LEETArduinoPendant/releases
• Copy the LEETArduinoPendant.dll plugin file to the C:\UCCNC\Plugins directory!
• Copy the Solid.Arduino.dll file from the Solid.Arduino release folder to the C:\UCCNC directory.
• Please note that you might need to install Arduino USB Driver in order for your Arduino to work on the target computer!
• Launch UCCNC.exe, go to Settings->Configure Plugins, and mark the LEET Arduino Pendant plugin as Enabled and Call startup
• After everything is installed, Arduino is connected and UCCNC is running, press the "Enable" (+5v to D2-B-ENABLE ) button that will tell the plugin that the pendant is ready to send signals! D13 (LED+) will then have a continuous +3.3V signal alerting you of that!

Hardware Acquisition (Amazon)

Fusion F360 desing files Size:2.55 MB

I have just released a big update for our HSMAdvisor for MasterCAM.

Plugin v2.1.12 now supports Mastercam 2021, 2020 and 2019

Features for all versions are now aligned to the latest HSMAdvisor code!

Check it out here: https://hsmadvisor.com/?page=HSMAdvisor_for_MasterCAM

Cheers!

Because the latest version of MasterCAM 2020 was just released last month, we too had to create an updated version of HSMAdvisor plugin.

As usual you can get it here: https://hsmadvisor.com/?page=HSMAdvisor_for_MasterCAM

There were quite a few changes on the back end, but users would not notice any of them, so why bother with proper release notes?

Just download, install and enjoy!

Do not forget to tell you MCam-loving friends about HSMAdvisor!

Cheers!

I have been really busy lately working on the large update for HSMAdvisor- Mastercam plugin that it totally slipped from me that Machine Cloud services were down.

Just had it fixed.

Thanks to everybody who reported the issue!

Best regards.

HSMAdvisor Machine Cloud

Hello everybody!!

Hope each one of you had a lot of fun during the holidays!
I have just uploaded HSMAdvisor version 1.521 but because of huge amount of changes, i will not release it to the wild right away.

There is a week or so of testing in it as I see it.
Any one of you could help me out a bunch by downloading and  trying the updates.

Plugins: HSMAdvisor for MasterCAM

Standalone: HSMAdvisor

Let me know if you find anything wrong with it!

Cheers!

I have just uploaded the HSMAdvisor hook for MasterCAM 2018.

That calls for a drink!

The C++/CRL interop that runs on the back end has been developed over 2 years ago and i have not opened it much since.
Because there were some breaking changes in 2018, i had to reopen the can of worms and ... whew! That was not eazy to remember all the horrible things i have done so long ago ago!

Any way. Now we have a nice lineup of HSMAdvisor plugins for 3 latest MasterCam versions (X9, 2017 and 2018).