Things new in this version:

• Added Lead Angle/Taper Angle/Tip Angle switch that allows to specify the angle of the cutting edge.
• Added V-Bit engraving cutters.
• Added wood materials
• Stainless steels from Medium and Easy groups have been revised.

Tool library changes:

• Tools no longer carry any information about material or engagement- all that extra data is now saved with Cuts
• Fixed a small bug with copy/move function.

HSMAdvisor 0.018 is avilable for download.

First of all we have a new feature.
It is Machine Profiles now users can maintain their own machine types.

Inside machine profiles users can specify machine power curve that allows to warn user if power required to make the cut is outside machine power curve.

Because of added new features version 0.018 now requires .NET 4.0 or later

Also several bugs have been fixed:

• Serial Key bug that caused some keys to malfunction and not recornise by the program.
• Comma/Dot decimal point in some locales have been fixed

Sometimes people ask me: "I tried your calculator, and i liked it, but it seems to me a little too aggressive...do you actually do any testing?"

Well, to those I say that not only i do testing, but i run production jobs 100% calculated with my own HSMAdvisor.

Many machinists say that nothing beats an experienced operator holding his hand on feed hold button and playing with speed and feed override trying to find the "sweet spot" where cutting speed and feed rate are maximized and chatter is eliminated or reduced.

And it is correct, but not any machinist is experienced or actually knows what he is doing.
Many machinists also finish their apprenticeship program and never learn a single thing about new tooling types and materials since. They bag years of experience, but their knowledge is stuck on a level it was when they first got their license.

Also not a single person can possibly know cutting conditions for hundreds of materials and remember all of the jobs he had ever ran.

This is where tool database comes in.

Not only can you save tools to cut down and in many cases eliminate entering parameters for every calculation.
But you can (and should) save cutting data for each particular case.

A single tool entry can contain an unlimited number of cuts attached to it, so machinist never has to remember everything.

Here is a i made video of slotting D2 with variable helix hi-performace endmill.

Material: D-2 Tool Steel 200-250 HB
Tool: 0.500in 4FL Carbide TiAlN coated Solid HP End Mill
Speed: 360.0 SFM/ 2751.6 RPM
Feed: 0.0023 ipt/ 0.0094 ipr/ 25.76 ipm

Engagement:  DOC=0.330 in   WOC=0.500 in

I have just released HSMAdvisor build 0.017!

First you should uninstall the previous version.
As some of the data files are not compatible with the version 0.017

After downloading and installing it you will receive another 30 days to play with my software.

New things:

• A bunch of new materials
  Structural steels added 1035, 1045 and some other
• Grooving turning tool added to the tool list
• Several Tools and Cuts can now be selected at the same time and deleted or moved to a different Library
• Double click on myCut ToolLibrary now causes the Tool/Cut to load
• HSM Cutting speed compensation now only turns on when HSM/Chip Thinning is checked.
• Huge number of bugs fixed.

Get it HERE ->http://hsmadvisor.com/

Enjoy and don't forget to leave your feedback.
You can do so support forums.

Unfortunately because of high number of spam messages You will have to register first (unless you already did)

Forums are located at http://zero-divide.net/index.php?page=forums&shell_id=170&category_id=1123, a simple registration on my web site (zero-divide.net, register) allows you to post your questions/feature requests/suggestions.

Need i remind you that registered users who actively participate get full version for FREE?

As you know the long-awaited standalone version of FSWizard is being prepared for the release right now.

I am changing the name it is going to be marketed under.

Down the line The product is going to consist of many modules.
And in order to give it a name that would encompass a wide variety of tools under one umbrella it has been decided to change the name of the solution to HSMAdvisor

A new website is being constructed right now around new product

It is going to be located at HSMAdvisor.com

But we are not forgetting where we came from.

FSWizard is becomming one module inside HSMAdvisor solution.
So you will still see FSWiz name popping up here and there.

Also as i said earlyer and robably against better judgement i will keep HSMAdvisor(FSWizard):Online Calulator you have come to love and depend on free for everyone to use.

Speeds and Feeds by HSMAdvisor (FSWizard)
Material: A-36 Hot Roll Steel 160-220 HB
Tool: 0.500in 4FL Carbide TiAlN coated Solid HP End Mill (WIDIA Metal Removal Maestro)
1" Stickout, 0.625 Flute Length
Speed: 528.0 SFM/ 4035.7 RPM
Feed: 0.0028 ipt/ 0.0114 ipr/ 46.00 ipm
Chip Thickness: 0.0028 in
Engagement:  DOC=0.250 in   WOC=0.500 in

Using Peck Cycle is often needed when drilling deep holes.
When using proper feed and speed no peck is required at depths of up to 3xDia for regular or 5xDia for High-Performance Parabolic drills.
At depths up to 10x, up to 5 pecks are required for regular  drills and up to 3 for Parabolic.
Anything over 10x Dia requires constant pecking of 0.5-1x Dia for regular drills and 1.5-2 Dia for Parabolic.

Since for programming you need a peck amount. Here are the numbers:

Of course our HSMAdvisor Speed and Feed Calculator suggests not only the Speeds and Feeds but also the proper peck depth for various drill types and depths of the hole.
It in fact was the first machinist calculator to do so. This feature was much later borrowed by our competition.

And here is a pretty image showing Peck VS Hole Depth for regular twist drill:

This not only means that peck amount should be different for different styles of drills and depths of holes.
But also that peck distance should be different for different stages of drilling the same hole.
Ideally we should start the hole with large pecks, that continually reduce as the hole gets deeper and deeper.

Let's find out how we can apply this knowledge when programming our toolpaths.
This is format for normal Pecking: