There had not been any updates to HSMAdvisor for several months now.
And there is a very good reason for that.

We have been working hard on a lot of new super-cool features and improving the old functionality.

BTW: This Update Resets the Trial Counter!

Let us cut to the chase.
Here is a list of all the latest changes and improvements:

• New Cut Cloud controls added (beta only!)
• New Cast Aluminum materials
• New combined Tool Torque and Deflection Limit controls
• New and Improved Tool Display Graphics. Now for Turning too!
• Lathe Tools now consider Shank size when suggesting chip-load.
• New Mass Edit - > Set SFM/Feed Overrides command in the Tool Database
• Improved Tool Deflection calculations
• Improved and refined a lot of behind-the-scenes stuff

I am going to explain the most important improvements below.

Latest advances in tool technology make milling of high carbon and tool steels as reliable and predictable as benign aluminium alloys.

In this video a large 4140 steel component is being roughed out at 2700RPM and 600 inches per minute.
While achieving  impressive material removal rate (20 pounds of steel machined off in a matter of half an hour!) the tool life puts the old school square shoulder endmills to shame.

Yes, it could(and should) have been machined using a bigger cutter, but I wanted to put the tool to the test.
And it performed beautifully: Was able to surpass the recommended starting speeds and feeds by at least 170%!

Look for the HSM machining of the round central pocket in the beginning.
Here we have a 12mm 6 flute Coated hi-performance endmill, cutting 1" deep at 0.047" (10%) rWOC.
at 10000 RPM and 300 ipm feedrate. the chipload works out to be 0.005". Material is 4140 pre-hardened steel.

Impressive isn't it?
Those results have been achieved with uber-expensive BlueSwarf tap-test technology.

This is one video that caught the eye of one of my HSMAdvisor trial users:

Being a geek and wanting to help the user make the right decision I immediately punched the numbers into my HSMAdvisor app.

Here is what I've got:

I would like to announce the launch of a brand new product called HSMCode.

HSMCode combines the power HSMAdvisor speed and Feed calculator, its advanced Tool and Cut Database and the new functionality of HSMCode into one seamless product!

What does HSMCode Do?

HSMCode allows you to create ToolPaths from imported CAD or Solid geometry with ease.

All you need to do is pick features that need to be machined and HSMAdvisor will pick the most suitable tool, calculate proper speeds and feeds and then HSMCode will generate the G-Code for your machine

As simple as that.

You can also create additional geometry using an in-built CAD designer and Simulate your Toolpaths to verify the correctness of your work.

The sales will begin in a couple of months on June 31 2016!

Please contact me if you would like to test the early demo version, affect the development of the software and (depending on the value of your input) receive your Lifetime Subscription for free!

Cheers!

Being as vast and as complex as it is HSMAdvisor Tool Database may seem overwhelming for many users despite all the benefits of using it.

To address this issue I have just added a new category to our HSMAdvisor on-line Help resource called Tool Database & Tool Inventory

Here is a the opening article of that category:

In all there are 5 articles in there already describing many of its functions in detail.
Please check them out if you are not sure what the Tool Database does and how to use it.

And as always: when in doubt - ASK :)

We have just released a pretty important HSMAdvisor v1.217 update!

I strongly encourage everybody to go ahead and install it as it contains some big improvements.

What is new and improved in this update:

• New Tool Database Status Indicator:
  Status Bar Indicator showing whether the Database file is being written, up to date or if write has failed
• A Warning now shows up when HSMAdvisor is closed with DB changes not saved.
• Now you can not close HSMAdvisor until Database file has been written to the disk
• A local backup copy of Shared database is now created on each computer for cases when connection is unavailable.
• Fixed the problem when new Tools and Cuts were not added to the shared database
• Fixed some (./,) locale-related problems.
• Fixed the problem of some settings not being saved.

I would like to explain one new feature here - The Tool Data Base Status indicator:

On the status bar of HSMAdvisor screen you can now see The Tool Data Base Status indicator (later DB Status) icon.

Every month we are getting a good amount of feedback and suggestions.

Everything is getting prioritized and eventually implemented. Urgent stuff is getting done fast. And other "nice to haves" are getting pushed down according to their usefulness / difficulty (yes, everyone secretly wishes my program could also edit and create HSM g-code :)).

It is amazing, but almost half of HSMAdvisor's features were originally suggested by our loyal users!

The latest update HSMAdvisor 1.213 addresses some of the feedback I have received last couple of months.

So the New features are:

1. Smart Depth and Width of Cut (DOC/WOC) suggestion (user suggested)
2. Compressing of Shared Tool DataBases
3. Display of Stock status on Tool DataBase tables (user suggested)
4. Various little improvements like new Heli-Coil reference, better DOC/WOC calculation better multitasking, etc. (mostly based on user feedback)

Let's go over the most important ones here:

Tool Inventory Advisor is now included into all HSMAdvisor License types!

This feature is absolutely free for HSMAdvisor customers. No special login is required. It is already built in!

Please download the latest update to enjoy the latest update!
Some video tutorials will be published this weekend.

Also in the this update:

• Changed the look of Material and Tool drop-downs
• Added search to Tool list drop-down
• Uploaded new machines to the HSMAdvisor Cloud
• Improved function of Tool Library
  Fixed small bugs
  "Shared Database" flag is now set in the database file itself

We have some (I am sure welcome) addition to our family of tool types supported by HSMAdvisor.

The new tool type is "Boring Head".

This tool is used for finishing holes on milling centres. Also in this release I have made a lot of improvements to operation of myCut Database and revised ssuggested depth of cut for milling tools when used at low radial engagement.

More details on the HSMAdvisor Download page.

Regards!

I have not announced the previous update here, so i am going to cover the latest changes here.

New and Improved Things:

• Fine-tuned Speeds for drilling tools
• Added more database self-repair capability
• Added "Uddeholm" vendor' material family

An update to port those changes to Android and IOS apps is under way

Would like to thank everyone for their continuous support and feedback.

I do not know what i would do without you guys!

Thanks!