Finally got all the parts a coulple of days ago and by now have connected everything on the table.

By accident ordered a wrong mounting plate for the encoders and decided to design and 3d print themon my own. In the morning I had 3 brand new encoder mountings!  

By trial and error figured that it is best to leave the default encoder count to 2048 PPR. With that set, the servos are very stiff yet quiet. Almost no dithering.

Managed to connect the spindle control and have it turning CW at programmed speed. Yet can't figure out how to run it backwards:(

3D-Printed Encoder Mounting Encoder Top Encoder Bottom Electrical Cabinet All connected on the table

We have many helpful articles over at HSMAdvisor Help portal. But beacuse of that very reason not many website visitors actually read any of them.
It is a pitty that most advanced users will never actually visit the help section, because they already know how to operate HSMAdvisor.

And this particular one, I believe, is too useful (I just updated it to include more info) for my customers and other machinists to keep it burried in some help section that few ever read.

So here you go:

This is 21st century and we all live in the age of the Internet.

While some software developers claim to use it for the benefit of the customers they in fact only care about license protection benefits it can provide.

Here is how HSMAdvisor Speed and Feed Calculator uses the big WWW for the benefit of its users:

1. Tool Database and Cutting Data Sharing
   Not many users realise that simply placing the Tool Data Base file on a shared network drive or service like DropBox or Google Drive will keep their Tool DB in sync on all of their computers running HSMAdvisor.
   Oh, regarding the "running on multiple computers" thing.....
2. Floating License allows users to run a single seat of HSMAdvisor on multiple computers non concurrently.
   All you need is internet connection! Permanent Licenses do not even need internet connection at all.
3. Cloud-Hosted Machine Profiles.
   Machine Profiles are important part of out calculator tool. Among other things they allow to prevent machine stalls and resulting machine damage and tool breakage.
   You can upload your Machine Profiles to HSMAdvisor Cloud for Public or Private access.
   Or you can request a machine profile to be added and I will upload it for you to easily download.
   All within the HSMAdvisor Machine Definition dialog!
4. Cut Cloud. The place to get other Machinist's experience at your fingertips.
   Another great feature that we are actively developing right now is the Cut Cloud.
   It allows Machinists to share their cutting experience with other HSMAdvisor users.
   It is still in development but shortly we are going to populate out public online library (Cut Cloud) with cutting data from popular tool manufacturers.
   Anyone running HSMAdvisor will be able to just dial in their cutting tool, connect to the Cloud and see how others run their tools in similar cutting conditions on similar machines.
5. Immediate and Accurate Licensing.
   A few times I got emails from disappointed machinists who were not aware of HSMAdvisor and thus chose a competing software product.
   They all were complaining about misleading Licensing schemes some software developers were using that hindered their work. Things ranged from not being able to register their seats for hours after completing the purchase to having to keep their computers online almost uninterruptedly (despite claims it could run offline for weeks) to keep their software running.
   HSMAdvisor uses transparent Permanent and Floating Licensing scheme that will not leave you hanging.
   All purchases are handled automatically and our new customers do not need to wait for a next business day to get their purchase functioning.
   We constantly work on making your experience as flawless as possible and do not linger on past achievements.

There is a lot more work planned and already in progress.

In the age when everyone is talking about how internet is turning the world around we are doing our small part in making it happen!

Thank you, everybody for your support and feedback!

There had not been any updates to HSMAdvisor for several months now.
And there is a very good reason for that.

We have been working hard on a lot of new super-cool features and improving the old functionality.

BTW: This Update Resets the Trial Counter!

Let us cut to the chase.
Here is a list of all the latest changes and improvements:

• New Cut Cloud controls added (beta only!)
• New Cast Aluminum materials
• New combined Tool Torque and Deflection Limit controls
• New and Improved Tool Display Graphics. Now for Turning too!
• Lathe Tools now consider Shank size when suggesting chip-load.
• New Mass Edit - > Set SFM/Feed Overrides command in the Tool Database
• Improved Tool Deflection calculations
• Improved and refined a lot of behind-the-scenes stuff

I am going to explain the most important improvements below.

Have you ever wondered how much tool life can deteriorate when using coolant with High-Speed Machining (HSM)?
Or maybe you never really saw the boost in tool life when using HSM techniques because you had to use coolant?

Well, here is a test result I just got from running the same tool at the same Speed and Feed with and without coolant.

Did you know there are three ways you can touch off your tools?

Because of how Machine Offsets add up, there are several ways CNC machinists can set their Tool and Work Offsets.

This is especially true for Tool Length Offsets.

Tool Offsets can be either Positive or Negative.
Depending on your Machine Shop equipment you should use one or the other.

Regardless of how you set your tool length offset, you apply it the same way.
Right after the tool change and after turning on your spindle and moving to your X Y position above the part.
The very first absolute Z movement should be the line where you apply the tool length offset.

Positive Tool Offsets (gage line tool length offsets)

In the case of Positive Tool Offsets, the offset represents the Length of the tool measured as a distance from the Gauge Line of the spindle (typically spindle nose) to the tip of the tool. The longer the tool, the larger your Tool Length offset will be.

Recently I had to machine a few pieces after turning.

Because the very top of the part was supposed to be machined off, I could not clamp through the central hole like I often do.

Decided to quickly turn an expandable washer out of aluminum and a plastic spacer that would collapse a little bit under clamping pressure and allow the part to sit firmly against the base of the fixture.

I liked this method so much I am going to do the same next time I have similar part to make.

See pics below.

Later on i will try to post some more pictures of other setups I did.

All the pieces apart Fixture, spacer, expandable washer, FH screw Workpiece mounted on

The First Ever HSMAdvisor Speed and Feed Wizard hook for MasterCAM has been released today for everybody to download for free.

Getting it to this stage has been a titanic effort for me and I am going to put a lot more of it in the coming months: i need to get it to pretty much perfect state before i start forgetting how i did all those things.

Because of this each update i release will extend trial period by 30 days.

This will last for as long as needed to finish the bulk of developing it.

At this moment the following toolpaths are fully recognized:

• Face Mill
• Contour
• Pocket
• Drilling
• Circle Mill
• All 2D HST Toolpaths:
  Dynamic Milling
  Dynamic Area
  Blend Mill
  Peel Mill

The only exception is: Coolant parameters are getting lost somewhere in the process. So please double check it before posting!

Things to be added in the coming days/weeks/months:

1. Fix Coolant
2. Engraving
3. Other Circular Toolpaths such as ThreadMilling etc.
4. Conventional and HST 3D Toolpahs
5. Turning

If you have any suggestions or find any bugs please let me know.

I would like to reassure my current customers that HSMAdvisor Hook is/will be included with your license once this all is set and done.

Please help me with your suggestions/bug reports make this thing even better for all of you!

Here are the latest 2 videos i uploaded to my Youtube chanel

Setting up HSMAdvisor hook:

Calculating cutting parameters for Face Milling, Saving Tool and Cut data and recalling it when needed:

Cheers. And a huge "thank you" to everyone who has been supporting me!

I have just finished uploading the latest update for FSWizard apps to both iOS and Android stores.

Your iOS update should be available in about 3 to 5 days, while it is already available on Google Play.

As always my thanks go to Apple for killing 90% of my day on trying to find and fix stupid xCode quirks.
Thanks, apple guys! I wouldn't know what to do with all of my time if your stuff worked the way it was supposed to!

Here are just some of the changes in the latest version v1.40

• Added new materials
• Fixed Turning MRR/HP Calculation
• Fixed Sticky Lead Angle
• Changed WOC label in Turning mode to DOC

Trial Reset For Everybody!

I have just uploaded another update to HSMAdvisor. You can download the updated version over here -> http://hsmadvisor.com/index.php?page=Download

This update resets trials on ALL unlicensed computers.

In it i addressed some of your concerns  regarding readability of the screen.
A qualified committee, consisting of me and my lovely wife, who no-doubt has better taste than me, decided upon the new screen layout.

Behold:

Basically i am returning to the old layout where controls are grouped in blocks and not in rows like in previous version.

Please let me know if you have any feedback and want something improved upon!

Other new things in this update include 2 new high performance coatings - nACo and nACRo.

Also in this update i improved licensing by granting floating license holders a grace period when they are unable to connect to the server.