Subscribe to Blog
Email Address
 

Cycle Format:

G184 X Z C K (I) F Q E
OR
G184 X (Z) R C K (I) F Q E

G180 (Cancel)

  • X:
    For face operation: Start Position
    For side operation: Target Diameter
  • Z:
    For face operation: Target Position
    For side operation: Start Position
  • C: C-Axis index position
  • I: Shift from G00 for SIDE operation only
  • K: Shift from G00 for FACE operation only
  • F: Feedrate
  • E: Dwell
  • R:
    For face operation: Depth of hole, Negative
    For side operation: Diameter
  • Q: Number of holes to repeat

Example:

Code:"OKUMA SIDE TAPPING SAMPLE PROGRAM"
O1
(12607T020-AAAQ PART BEGIN)
G50 S2000
N300 G0 X100. Y50.
M110
NAT10
G94 M146 M8
G17
M0
(T10-29 10-24 TAP)
G0 X10.838 T1024 SB=300
M13
G0 Z-0.375
G101 X9.238 F200.0
G184 X7.538 Z-0.375 I0.2 C0 F12.5
G180
G0 X10.838
C30.
G101 X9.238 F200.0
G184 X7.538 Z-0.375 I0.2 C30. F12.5
G180
G0 X10.838
M146
G136
G95 M12 M9
M109
G0 X100. Z50.
M1
TLID
(12607T020-AAAQ PART END)
M2

Comments:
No Comments posted yet, be the first one!

New Comment to: Compound Cycle Tapping on Okuma Lathe

Name: *
Solve Capcha:
*
Sing In

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here