Subscribe to Blog
Email Address
 
Pages:(1) [1]

Search for returned 0 results

Tool Inventory Control has been added to HSMAdvisor as a free feature for our customers.

Here is a quick video explaining how to use this new feature.

Should you have any questions or recommendations please let me know via email or support forums.

Read more


First FSWizard video!

January 17, 2015, 4:43 pm

I have just uploaded my first FSWizard CNC MAchinists Speed and Feed Calculator video tutorial.

This is a quick walk through the basic functionality when using milling tools.

Please excuse my tired voice and occasional stuttering. This was my 9th take- every time either my computer crashed or i was interrupted by my kids running around and causing mess.

I am planning to release more videos. So please let me know what other topics i need to cover.

Read more


One of the latest additions to HSMAdvisor speed and feed calculator is the ability to set manufacturer-recommended speeds and feeds for work-piece materials and groups of materials.

Here is a YouTube video walk-through showing how to add S&F tables into the program https://www.youtube.com/watch?v=AJOgWfgy99U

HSMAdvisor uses Brand Name and Series Name to assign speed and chipload tables to tools.

A new "Speed and Feed Source" (S&F Source) indicator has been added to quickly tell user which speed and feed table is being used right now.

Read more


Plugins Tab now has functionality to Download and Save webpages to your computer, so they are always available offline.

There is now an address bar on the bottom of the screen.
If you enter URL address and click go, you can load website in a new tab.

You can save it as one page by right-clicking on corresponding tab and selecting "Save Page on Disk":

Alternatively you can save your webpage in ".mht" format using Internet Explorer into HSMAdvisor\plugins\ folder.

Next time you launch HSMAdvisor, your saved web page will show up in Plugins Tab.

This is where all plugins are saved:

You can use *.HTML, *.HTM, *.MHT and *.TXT files.

If you have any Microsoft Word documents you would like to keep there as well, you can save them "As Web Page" and copy to the plugins folder.

Read more


In this tutorial we are going to explore different options and techniques when programming cutter movement.

Lets begin with a simple part shown in a drawing below.

Basically it is a rectangular piece 4.00x2.00
For the purpose of simplicity lets make the depth of our profile (z- dimention) 0.75"

We are going to use a 0.5" dia endmill, again because it is a very common size and is easy to do basic math with.

I took a liberty of puting locations for our part/toolpath, so it is easy to extract numbers from the drawing just by looking at it.

Notice the green rectangle. This rectangle represents the path that the center of the tool will have to take to produce the part with required dimentions.
The thing is: because endmills have certain diameter, the center of the tool must be always offset by its radius.

There are two ways of doing that.

Read more


At my day job I am starting to do more and more manual programming.

Which i do not realy like, but since am at it anyway i have decided to keep piling little articles about G-Code programming into this new category.
This way when i forget things again i will be able to quicly refresh my memory.

Program Start

O0001 (COMMENT OR PROGRAM NAME)

Starting safety blocks

(G20 IMPERIAL UNITS, G21-METRIC)
(G17 XY ARC PLANE, G18-XZ, G19-YZ)
(G40 CANCEL TOOL RADIUS COMPENSATION)
(G49 CANCEL TOOL LENGTH OFFSET)
(G80 CANCEL CANNED CyCLE)
(G90 ABSOLUTE POSITIONING MODE)

G20 G17 G40 G49 G80 G90

Tool Change Routine

(T14 - call 2.5" Face mill)
(M6 - Perform tool change)
(G0 - rapid feedrate)
(G55-G59 - Choose Work Offset)
(X, Y - Command a Position to move to)
(S - choose spindle speed)
(M03 - Turn spindle on Clockwise, M04 - Counter-clock wise)


T14 M6
G0 G54 G90 X{X} Y{Y} S{SPEED} M03;

Apply Tool length offset at retract height, Turn on Coolant

(G43 H14 Z2.0 - All codes must be in the same line Apply cutter length offset from record #14 to cuttent tool, move to 2.0 above work at the same time )
(M8 - Turn on Coolant)

G0 G43 H14 Z2.0 M8

Rapid tool to plunge height

G0 Z{Z_PLUNGE}

Plunge to cutting depth at plunge feedrate

G01 Z{Z_DEPTH} F{F_PLUNGE}

Make a straight cut in xy direction at cutting feedrate

G1 X{X_POS} Y{Y_POS} F{F_FEED}

Retract to plunge height at either rapid or retract feedrate

G1 Z{Z_PLUNGE}

Retract to rapid height, turn off colant

(M09 - Turn OFF coolant)

G0 Z{Z_RETRACT} M09

Retract to tool change height, turn off spindle

(G28 G91 Z0 - all coes must be in the same line, move Z axis to HOME POSITION through a reference point)
(G91 Z0 - Causes reference point to be the current location, thus sending axis straight up )
(M05 - Turn off spindle)

G0 G28 G91 Z0 M05

Perform Next tool change or end program

M30(end program)

Read more


HSMAdvisor Pocketing Tutorial

December 12, 2013, 6:24 am

Please check out this tutorial i made for calculating speeds, feeds and engagement when pocketing.

http://www.youtube.com/watch?feature=player_detailpage&v=qctpiDWiF34

Read more


Pages:(1) [1]
Sing In

© 2009-2018 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here