Subscribe to Blog
Email Address
 
All related to speeds and feeds on different materials
Pages:(2) [1] 2

Avid CNC Benchtop Pro: HSM and High Feed Milling

March 15, 2020, 3:36 pm by Eldar Gerfanov (Admin)

On the heels of the previous post.

YouTuber Breaking Taps has just published another of his interesting videos:

In it he is testing various High-Speed Machining techniques on his benchtop CNC router.

Also it is mentioned that HSMAdvisor does not seem to like those small high-feed cutters: at some point some calculated values become negative.

This is a legitimate criticism and it actually happens because default cutting depth of 0.024" becomes too large for the 0.24" Lakeshore high feed and mill and an actual Flute length of 0.015" must be entered in order to get proper values:


With actual 0.015" flute length entered the recommended speed and feed values are now in the safe end of the ballpark suggested by the manufacturer.

Task added to the issue tracker!

A Total Guide into Plunging and Ramping

April 4, 2017, 7:33 pm by Eldar Gerfanov (Admin)

Before we start milling away our stock we first need to get down to the required depth.

This is not a problem with external features when we can plunge outside.

When machining closed pockets, however, we need to find a way to get down to the machining depth first.

As usual there are several ways to get the job done. The plunging methods listed here are not ordered by their preference.

For various machining operations on different materials some may be more preferable than others.

Straight Plunging into a larger Pre-Drilled hole

This is one the best ones in my opinion.
Very few machining modes can compete in effectiveness with drilling and this method will get you the best combined tool life on most materials and (in case of many deep pockets) the least machining time, even when tool change time is factored in.

Read More 

Combating Chatter: 4 reasons to NOT reduce your feedrate

April 30, 2016, 6:58 pm by Eldar Gerfanov (Admin)
HarndenedLayer.png

We all have heard hundreds of times that when chatter is happening during machining, we should reduce our feed rate. The same advice we also hear for compensating for extra-long tools and unstable setups.

Let me explain why I think this is mostly incorrect.

Let’s list  the effects of reducing the feed rate:

  1. Reduces tool life.
  2. Reduces productivity.
  3. Increases deflection.
  4. Causes chatter.

Let me explain from my own experience and research I have made each of these points and a simple way to avoid chatter's adverse effects.Read More 

Perfect Ballnose Engraving Speeds and Feeds in Production Environment

December 6, 2015, 12:38 am by Eldar Gerfanov (Admin)
ballnoses_stepover.png

I regularly follow practicalmachinist.com forums.
Especially the cnc machining section of it.

I notice when CNC Speeds and Feeds questions come up people often suggest my HSMAdvisor Machinist calculator.
A referral by a satisfied customer is the best referral in my opinion. Thank you to everyone doing this great favor to me and my prospective users!

Other times users of HSMAdvisor question speeds and feeds it generates and instead of going to me, they ask on forums.
Which is always fine, because extremely often "wrong" results mean something wrong in users expectations or the data he feeds the calculator

In the process of discussion it usually turns out that the calculation results were correct, but because user decided to use a depth of cut or tool length, larger than he should have, HSMAdvisor compensates and gives a very conservative feed rate.

Just like in this forum post over here: Engraving with a 1/32 ball mill machinist wanted Read More 

Key factors Determining Success of High Speed Machining (HSM)

September 12, 2015, 7:29 pm by Eldar Gerfanov (Admin)

As a developer of a very successful line of speed and feed calculators I sometimes get questions like : "I calculated speeds and feeds for a conventional toolpath. Got 5.5 cubic inches MRR(Material Removal Rate). And then I calculated S&F for the same endmill with HSM parameters turned on and got almost the same amount of  MRR! What is even the point in using HSM parameters?" -they ask.

I would like to clear some things up for my friends.
In this article I will explain exactly WHY HSM machining is better and HOW to achieve better productivity and tool life.

For starters here are the main features of a HSM-capable cutter:

As usual there are several components of HSM that need to be present in order for it to work to its fullest. These are:

a) Machine
b) Tool
c) Workpiece geometry
d) Workpiece material

I intentionally did not number these as each one of those is equally important.

Read More 

A new Help article on HSM

September 2, 2015, 10:23 pm by Eldar Gerfanov (Admin)

I often get email questions asking for clarification on merits of use of HSM And Chip Thinning check boxes when calculating speeds and feeds with HSMAdvisor and FSWizard calculators.

In this new help article will try to explain just what HSM means and in which situation you should use it:

http://hsmadvisor.com/index.php?page=help&shell_id=241&article_id=4574

Hopefully this will fill in the gaps and help our users to get more comfortable with our software.

Regards!

An interesting conversation

July 12, 2014, 10:32 pm by Eldar Gerfanov (Admin)

A few days ago one of FSwizard:PRo users questioned me over how FSwizard works.

The way SFM calculates seemed off to him.

As a result i made a quick sketch for him, that i thought i would share here.

Omar was asking me how come SFM seemed wrong for a 1" dia ball-nose cutter when making shallow depth cuts.

The sketch above shows exactly why.

On the left part we see a cutter engaged into the material to the depth equal to its corner radius.
At that depth the maximum effective diameter is achieved. So an old good RPM=4xSFM/Dia formula would apply.

But at shallower depths, effective diameter of the cutter is reduced.

At 0.1" depth of cut, effective diameter would only be around 0.6"

In fact it goes to zero at the very centre. So a higher RPM will be required to achieve the recommended cutting speed.

In the same thread i also explained how DOC/WOC balancing works.

So if you are interested - read on.

Here is the thread http://zero-divide.net/index.php?page=forums&shell_id=170&article_id=4590

 

Ways in which High Speed Machining (HSM ) works

October 12, 2013, 11:32 am by Eldar Gerfanov (Admin)

Lately there have been a lot of really interesting HSM topics on PracticalMachinist forums.

In one of them a guy who owns his own resharpening business posted a video of his endmill milling a block of D2 hardened to over 60 RC.
The forum topic is located here First try on D2 62Rc(video)

Here is his post so you know what we are talking about:

Quote:
In an effort to perfect our speeds and feeds while hardmilling, this is the first try. Its not right yet, but far from a failure. I apologize for the language at the end, but I do not edit my videos. The endmill was a reground garr VRX at .353 diameter. Parameters were 750 sfm, .018 radial, .300 axial and .004 ipt.
The next run will be at 650 sfm, .006 ipt using a mist sprayer. Also, any small areas will be blocked off to be ran at lower speeds to allow cooling time for the cutter. Just a note for anyone using a Mag Fadal, The E-stop button is not quick enough, use feed hold. The endmill was badly worn on the corners, but not broken, and will be resharpened and used again.

In the ensuing discussion i posted my own take on how and why HSM works

Quote:
HSM works in many ways.

1) Reduced cutting time per edge per revolution allows it to cool down more.
2) Chip thinning allows to increase chipload (advancement per tooth per revolution)
3) Increased depth of cut combined with shallow radial positively affects deflection. Tool bends less as it is more rigid towards the tool holder.
4) Higher cutting speed actually reduces cutting forces as heat generated in the cutting zone makes it easier to shear off a layer of metal. Yet because the time of contact is so small, most of the heat is carried away with the chip.
5) Higher RPM also allows to get rid of hot chips faster thus further reducing heat transferred to the tool.
6) Higher feedrate actually reduces relative cutting speed.
7) At high axial engagements more than one flute is in contact with the workpiece at different points along the axis of the tool. This too helps combat vibrations and chatter.
8) You are using more of the tool than just its tip, so technically you can do more work with one tool before it gets dull.
9) lastly it looks cool as hell and is very impressive. Whenever we know visitors or bosses are coming we try to make sure some HSM is going on even if application does not merit that
I am not sure if the air that is moved by the endmill is doing much, but i suspect he didn't mean exactly that.

 

How to properly choose cutting parameters in less than ideal conditions

July 13, 2013, 4:40 pm by Eldar Gerfanov (Admin)

We all have manufacturer speed & feed charts and have used their recommendations.

But sometimes those charts just don't apply.

For example manufacturer charts assume you are using their endmills at a certain stickout length, flute length and at a certain depth of cut.

But in the real life you rarely match all these conditions.
Sometimes you need to use longer endmill. Sometimes your flute is longer than what manufacturer gave you speeds and feed for.

What i am trying to say is that whenever your real life conditions differ from "normal" you "need to adjust accordingly".
In fact this is what is printed below many charts.

Too bad not many sources tell you how and what to adjust.

While failure to adjust cutting parameters often leads to chatter, poor surface finish and even tool breakage, one of the biggest mistakes people do when machining is Read More 

International Minicut Speeds and Feeds

January 11, 2011, 7:39 am by Eldar Gerfanov (Admin)

Here are the speeds and feeds for supercobalt minicut end mills.Read More 

Pages:(2) [1] 2
Sing In

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here